Kubota Farm & Ranch

  • 10821 92 St
  • La Crete, AB T0H 2H0
  • Call Us: 1 (780) 928-3268
  • https://www.lacrete-kubota.com/
Print This Page

2025 Vermeer® Trailed Mowers TM1200

Information

2025 Vermeer® Trailed Mowers TM1200

TM1200 highlights
  • Wide cutting width, narrow transport width
  • Complete, consistent cutting action
  • Minimized, convenient maintenance

Features may include:

Maximized productivity
  • Cutter bars are staggered and overlap for complete cutting action down the middle.
  • Help reduce labor and fuel by using one wide swath mower to cut more acres than multiple 3-point mowers.
Convenient operation
  • Help protect your cutter bar and your field. The suspension system complements the independent cutter bars, allowing each to contour the ground and operate at different levels.
  • Float over fields and contoured terrain with a nitrogen-charged accumulator flotation system that adjusts for varying field and crop conditions.
Built with the operator in mind
  • Get more protection from unseen obstacles with the wide skid shoes and suspension system that help protect the cutter bars and the friction clutch, which protects the drive system.
Simple maintenance
  • Minimize maintenance with 12 self-contained discs, each with their own set of gears, bearings and lubricants. Gears stay in the grease — even when mowing at extreme angles.
  • Gain easy access to the cutter bars with flip-up curtains.
  • Replace blades in seconds using the exclusive Quick-Clip® blade retention system.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Trailed Mowers TM1200
  • Available
  • Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)

Specifications

  • 2025
  • Vermeer®
  • Trailed Mowers
  • TM1200
  • General
  • Recommended: 85 hp | Drive: 540 or 1000 rpm
  • Torque Protection: friction disc clutch
  • Hydraulic
  • 31x13.5-15
  • Disc: 2950 rpm
  • 2 double-acting
  • Rate: 6 gpm
  • 1500 psi
  • 2-point with swivel gearbox, category II or III N
  • Mower swung out offset: 50 in | Disc Diameter: 19.7 in
  • 78 in
  • 8.5 ft
  • 22 ft
  • 15.5 ft
  • Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
  • Working: 18 ft
  • 22 ft
  • Total: 5900 lbs | Tongue: 1580 lbs
  • Number of Blades: 24 | Number of Discs: 12
  • Angle: Hydraulic pitch control
  • Curtain: 1400 g/m2 polyester woven material with flexible PVC covering
  • 3-year limited cutter bar