2025 Vermeer® Trailed Mowers TM1200

2025 Vermeer® Trailed Mowers TM1200

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Trailed Mowers
2025 Vermeer® Trailed Mowers TM1200

2025 Vermeer® Trailed Mowers TM1200

2025 Vermeer® Trailed Mowers TM1200

TM1200 highlights
  • Wide cutting width, narrow transport width
  • Complete, consistent cutting action
  • Minimized, convenient maintenance

Features may include:

Maximized productivity
  • Cutter bars are staggered and overlap for complete cutting action down the middle.
  • Help reduce labor and fuel by using one wide swath mower to cut more acres than multiple 3-point mowers.
Convenient operation
  • Help protect your cutter bar and your field. The suspension system complements the independent cutter bars, allowing each to contour the ground and operate at different levels.
  • Float over fields and contoured terrain with a nitrogen-charged accumulator flotation system that adjusts for varying field and crop conditions.
Built with the operator in mind
  • Get more protection from unseen obstacles with the wide skid shoes and suspension system that help protect the cutter bars and the friction clutch, which protects the drive system.
Simple maintenance
  • Minimize maintenance with 12 self-contained discs, each with their own set of gears, bearings and lubricants. Gears stay in the grease — even when mowing at extreme angles.
  • Gain easy access to the cutter bars with flip-up curtains.
  • Replace blades in seconds using the exclusive Quick-Clip® blade retention system.

PTO

PTO Power, Rated Engine Speed Recommended: 85 hp | Drive: 540 or 1000 rpm

Drivetrain

Driveline Torque Protection: friction disc clutch

Suspension

Suspension Hydraulic

Wheels & Tires

Tires, Rear Specification 31x13.5-15

Operational

Operating Speed Disc: 2950 rpm

Hydraulics

Hydraulic Type 2 double-acting
Hydraulic Flow Rate: 6 gpm
Maximum Pressure 1500 psi

Chassis

Hitch/Type 2-point with swivel gearbox, category II or III N

Dimensions

Dimensions Mower swung out offset: 50 in | Disc Diameter: 19.7 in
Transport Height 78 in
Transport Width 8.5 ft
Transport Length 22 ft
Cutting Width 15.5 ft
Height Working: 78 in | Cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
Length Working: 18 ft
Width, Working Position 22 ft

Weights

Weight Total: 5900 lbs | Tongue: 1580 lbs

Features

Features Number of Blades: 24 | Number of Discs: 12
Adjustability Angle: Hydraulic pitch control
Construction Material Curtain: 1400 g/m2 polyester woven material with flexible PVC covering

Warranty

Warranty 3-year limited cutter bar

Product Photography