2025 Vermeer® Whole Tree Chippers WC2500XL

Information

2025 Vermeer® Whole Tree Chippers WC2500XL

WC2500XL highlights
  • Expand your revenue stream with more flexibility
  • Designed with the operator in mind
  • Focus more on productivity and less on maintenance

Features may include:

Efficient material handling
  • SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.
  • With the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.
  • A compact design to maneuver more easily in the woods, on tight jobsites and down narrow paths, but packs 600 hp (447 kW) of power to meet your production demands.
User-friendly
  • Self-adjusting hydraulic dry clutch provides consistent engagement, helping to prolong clutch life, minimize maintenance cost and optimize operator efficiency.
  • Easy knife change-out system to help reduce maintenance on the jobsite.
Maintenance-friendly
  • High-wear material flow areas of the machine — like the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to help extend machine life.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real-time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Whole Tree Chippers WC2500XL
  • QSX15
  • Ultra-low sulfur diesel
  • Available
  • Drum/Disc Cutting System: 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in

Specifications

  • 2025
  • Vermeer®
  • Whole Tree Chippers
  • WC2500XL
  • General
  • QSX15
  • Cummins
  • Gross (Maximum): 600 hp
  • Tier 4 Final
  • 6
  • 2050 ft-lb
  • Two-stage direct flow
  • Spin-on
  • Medium: Liquid
  • Drive: WS-series
  • Max Fuel Consumption: 31 gph
  • Ultra-low sulfur diesel
  • Planetary: Auburn Model 9 | Manufacturer: White
  • Type: PT Tech electronically controlled dry | Drive Engagement: Hydraulic
  • Tandem axles / Leaf spring
  • Air
  • 385/65R22.5 Super Single
  • 22.5 x 14 aluminum
  • Group 8D 1400 CCA (dual)
  • 24V
  • 105
  • Drum/Disc Cutting System: 1169 rpm | Feed Roller Speed: 98 ft/min
  • 121
  • System: Open-center | Filtration Method: Intake suction screens and return filter
  • Flow at Maximum RPM: 16 gpm
  • Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi | Auto Reverse PSI: 3750 psi
  • 10" x 4" x .375" wall rectangular tubing
  • Pintle
  • Maximum Angle of Continuous Operation: 31 deg | Drum/Disc Cutting System - Material Capacity: 25 in / Thickness: .5 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 17 / Bedknife Size: 34" wide / Bedknife Thickness: 1.5 in | Feed Roller Distance to Drum: 1 in | Discharge System - Bottom Thickness: .1 in / Wear Plate Thickness: .2 in / Top Thickness: .2 in / Side Wall Thickness: .2 in / Deflector Thickness: .2 in / Side Deflector Angle: 14 deg / Up Deflector Angle: 22 deg / Down Deflector Angle: 14 deg | Infeed Slope: 6 deg | Infeed Conveyor Material Construction: .50" thick | Grapple Handle: 30" wide
  • Maximum (Operation): 29.8 ft | Feed Table: 10 ft
  • Maximum Feed: 27 in | Chute: 132 in
  • Drum/Disc Cutting System: 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum: 29.8 ft
  • Maximum: 108 in
  • Maximum: 10.9 ft
  • Cutter Drive: 5.4 in
  • 200 gal
  • Tank: 33 gal
  • With Filter: 52 qt
  • Fan: Reversible | Safety Lock - Number of Positions: 4 | Drum/Disc Cutting System Type: Adjustable | Useable Edges: 1 | Replaceable Threaded Knife Block: Hex nut | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 4 | Number of Bearings: 2 | Cutter Drive - Type: Pillow block / Manufacturer: Dodge | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Rotation Type: Hydraulic | Rotational Lock: Hydraulic | Flow Control: Two - feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Display: DP10 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab | Number of Infeed Chains: 2
  • 38000 lbs | Tongue: 7500 lbs | With Shaft: 3163 lbs | Infeed Roller: 575 lbs
  • Drum/Disc Cutting System: Bolts/Knife: 5 | Infeed System: 12
  • Recommended Oil: CES 20078 or 20081 / Hy-Power 68, 46, or 32
  • 12 rib 5 V
  • Feed: Dual independent chain
  • Drum/Disc Cutting System: A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Bottom Replaceable Wear Plate: AR 400 | Fender Description: Jeep style (steel)