2025 Vermeer® Whole Tree Chippers WC2500TX - Tier 4 Final

Information

2025 Vermeer® Whole Tree Chippers WC2500TX - Tier 4 Final

WC2500TX highlights
  • Enhanced maneuverability wherever the job may take you
  • Productivity and versatility to complete the job
  • User-friendly operation for confidence on the job

Features may include:

Powerful performance
  • With the variable-speed, dual-infeed conveyor chains operators can concentrate on loading the machine, not pushing the material through.
  • A compact design to maneuver more easily in the woods, on tight jobsites and down narrow paths, but packs 600 hp (447 kW) of power to meet your production demands.
  • SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.
Maneuverability
  • Efficiently move the machine around jobsites without the need for additional support equipment. The track undercarriage offers 29 in (73.7 cm) of belly clearance and rising chain rollers for material cleanout.
Convenient control
  • The ACS monitors the machine's health.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real-time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Whole Tree Chippers WC2500TX - Tier 4 Final
  • QSX15
  • Ultra-low sulfur diesel
  • Available
  • Drum/Disc Cutting System: 34 in | Infeed Roller: 34 in | Track pad: 20 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in

Specifications

  • 2025
  • Vermeer®
  • Whole Tree Chippers
  • WC2500TX - Tier 4 Final
  • General
  • QSX15
  • Cummins
  • Gross (Maximum): 600 hp
  • Tier 4 Final
  • 6
  • 2050 ft-lb
  • Two-stage direct flow
  • Spin-on
  • Medium: Liquid
  • Drive: WS-series
  • Max Fuel Consumption: 31 gph
  • Ultra-low sulfur diesel
  • Planetary: Auburn Model 9 | Manufacturer: White
  • Type: PT Tech electronically controlled dry | Drive Engagement: Hydraulic
  • Drive: 6.9 cu-in
  • Air
  • Group 8D 1400 CCA (dual)
  • 24V
  • 105
  • Drum/Disc Cutting System: 1169 rpm | Feed Roller Speed: 98 ft/min
  • 8.4 psi
  • 122
  • System: Open-center | Filtration Method: Intake suction screens and return filter
  • Flow at Maximum RPM: 16 gpm / 38 gpm (Track)
  • Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi / 4786 psi (Track) | Auto Reverse PSI: 3750 psi
  • 8" x 4" x .375" wall rectangular tubing
  • Maximum Angle of Continuous Operation: 45 deg | Drum/Disc Cutting System - Material Capacity: 25 in / Thickness: .5 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 8.5 or 17 / Bedknife Size: 34" wide / Bedknife Thickness: 1.5 in | Feed Roller Distance to Drum: 1 in | Discharge System - Bottom Thickness: .1 in / Wear Plate Thickness: .2 in / Top Thickness: .2 in / Side Wall Thickness: .2 in / Deflector Thickness: .2 in / Side Deflector Angle: 14 deg / Up Deflector Angle: 22 deg / Down Deflector Angle: 14 deg | Infeed Slope: 6 deg | Infeed Conveyor Material Construction: .50" thick | Track Gauge: 97 in | Track Pitch: 132 in
  • Maximum (Operation): 28.4 ft | Feed Table: 10 ft
  • Maximum Feed: 27 in | Chute: 132 in
  • Drum/Disc Cutting System: 34 in | Infeed Roller: 34 in | Track pad: 20 in | Feed Table: 98 in
  • Maximum: 26.1 ft
  • Maximum: 118 in
  • Maximum: 11.6 ft
  • Infeed: 28 in
  • Cutter Drive: 5.4 in
  • 200 gal
  • Tank: 33 gal
  • With Filter: 52 qt
  • Fan: Reversible | Safety Lock - Number of Positions: 2 to 4 | Drum/Disc Cutting System Type: Adjustable | Useable Edges: 1 | Replaceable Threaded Knife Block: Hex nut | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 2 or 4 | Number of Bearings: 2 | Cutter Drive - Type: Pillow block / Manufacturer: Dodge | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Rotation Type: Hydraulic | Rotational Lock: Hydraulic | Flow Control: Two - feed roller and infeed conveyor | Switches: Push button | Controller: Danfoss MC-050 | Display: DP10 | Toolbox Description: Lockable | Number of Infeed Chains: 2
  • 48500 lbs | With Shaft: 3163 lbs | Infeed Roller: 575 lbs
  • Drum/Disc Cutting System: Bolts/Knife: 4 or 5 | Infeed System: 12
  • Recommended Oil: CES 20078 or 20081 / Hy-Power 68, 46, or 32
  • 12 rib 5 V
  • Feed: Dual independent chain
  • Drum/Disc Cutting System: A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Infeed Floor: AR400 wear plate