2025 Vermeer® Whole Tree Chippers WC2300XL - Tier 4 Final

Information

2025 Vermeer® Whole Tree Chippers WC2300XL - Tier 4 Final

WC2300XL highlights
  • Enhanced durability allows you to spend less time on maintenance
  • Improved operator convenience
  • Engineered for efficient material handling

Features may include:

Powerful performance
  • SmartCrush technology allows you to increase down pressure when difficult material enters the cutting drum.
  • With the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.
  • A CAT® C13 Tier 4 Final engine provides 440 hp (328 kW) of power to meet your jobsite demands. A Tier 3 engine option is available for less-regulated countries.
Optimal cutting performance
  • Two knife options allow the operator to select the knife that meets their end product sizing needs.
Jobsite mobility
  • Built-in skid grab on the tongue allows it to be moved around onsite by a skidder or excavator.
Convenient control
  • A remote control allows operators to view engine parameters and change a variety of machine settings.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real-time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Whole Tree Chippers WC2300XL - Tier 4 Final
  • C-13
  • Ultra-low sulfur diesel
  • Available
  • Drum/Disc Cutting System: 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum Feed: 27 in | Chute: 132 in

Specifications

  • 2025
  • Vermeer®
  • Whole Tree Chippers
  • WC2300XL - Tier 4 Final
  • General
  • C-13
  • CAT
  • Gross (Maximum): 440 hp
  • Tier 4 Final (Stage IV)
  • 6
  • 1485 ft-lb
  • Two-stage
  • Spin-on remote
  • Medium: Liquid
  • Drive: WS-Series
  • Max Fuel Consumption: 22.6 gph
  • Ultra-low sulfur diesel
  • Planetary: Auburn Model 9 | Manufacturer: White
  • Type: PT Tech electronically controlled dry | Drive Engagement: Engaged dry clutch
  • Drive: 6.9 cu-in (113.1 cu-cm)
  • Dual axle | Leaf spring
  • Air
  • 22.5 x 14 aluminum
  • 385/65R22.5 Super Single
  • Group 8D 1155 CCA (Dual)
  • 24V
  • 105 amps
  • Drum/Disc Cutting System: 1169 | Feed Roller Speed: 98 ft/min
  • 118.1 db(A)
  • System: Open-center | Filtration Method: Intake suction screens and return filter
  • Flow at Maximum RPM: 16 gpm
  • Feed Roller Down Pressure: 1530 | System relief pressure: 4000 psi | Auto Reverse PSI: 3800 psi
  • Pintle
  • 10" x 4" x .375" wall rectangular tubing
  • Drum/Disc Cutting System - Material Capacity: 23 in / Thickness: .4 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 8.5 / Bedknife Size: 34" wide / Bedknife Thickness: 1.5 in (3.8 cm) / Pockets: 8.5 in | Feed Roller Distance to Drum: 1 in | Discharge System - Bottom Thickness: .1 in / Wear Plate Thickness: .2 in / Top Thickness: .2 in / Side Wall Thickness: .2 in / Deflector Thickness: .2 in / Side Deflector Angle: 14 deg | Grapple Handle: 30" wide | Infeed Slope: 6 deg | Infeed Conveyor Material Construction: .38" thick
  • Maximum (Operation): 29.8 ft
  • Maximum Feed: 27 in | Chute: 132 in
  • Drum/Disc Cutting System: 34 in | Infeed Roller: 34 in | Feed Table: 98 in
  • Maximum: 29.8 ft
  • Maximum: 98 in
  • Maximum: 10.9 ft
  • Infeed: 28 in
  • 150 gal
  • Tank: 42 gal
  • With Filter: 36 qt
  • Fan: Variable and reversible | Safety Lock - Number of Positions: 8 | Drum/Disc Cutting System Type: Babbitted | Useable Edges: One | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 8 | Tooth Design: Straight knives | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Rotation Type: 14 | Rotational Lock: 22 | Flow Control: Two-feed roller and infeed conveyor | Switches: Toggle On/Off | Controller: ASM - C248 WC2300 | Display: DP04 | Toolbox Description: Lockable | Tongue Description: Fixed with skidder grab | Number of Infeed Chains: 1
  • 35000 lbs | Tongue: 7300 lbs | With Shaft: 2200 lbs | Infeed Roller: 575 lbs
  • Drum/Disc Cutting System - 8 / Bolts/Knife: 4 | Infeed System: 12
  • Recommended Oil: API CJ-4 or ECF-3 / Hy-Power 68
  • Feed: Dual independent chain
  • Drum/Disc Cutting System: A8 chipper steel | Bedknife Material: Cold-formed low-carbon bar | Fender: Jeep style (steel)