Current Vermeer® Wood-Waste Tub Grinders

2025 Vermeer® Tub Grinders TG5000E

2025 Vermeer® Tub Grinders TG5000E

Swipe to View More

  • Year 2025
  • Make Vermeer®
  • Model Tub Grinders
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2025 Vermeer® Tub Grinders TG5000E

2025 Vermeer® Tub Grinders TG5000E

  • Year 2025
  • Manufacturer Vermeer®
  • Model Name Tub Grinders
  • Trim Name TG5000E
  • Generic Type (Primary) Tub

2025 Vermeer® Tub Grinders TG5000E

TG5000E highlights
  • Efficiency in a stationary electric tub grinder
  • Robust build quality for confident longevity
  • Equipped with Vermeer innovations to help protect your investment and optimize efficiency

Features may include:

Proven performance
  • A large tub opening allows for loading of large amounts of material to improve productivity.
  • The grinder features a 500-hp (373-kW) WEG® totally-enclosed, fan-cooled electric motor for the mill, a 60-hp (44.7-kW) motor for the hydraulic pump, and a 2-hp (1.5-kW) motor for the hydraulic cooling fan.
  • The Series III duplex drum offers proven cutting performance, and reversible hammers and tips nearly double the wear life of single-sided designs and simplify daily maintenance.
Jobsite efficiency
  • Monitor real-time performance and data via the on-rig display or remote control.
  • A reversing Flexxaire® cooling fan adjusts the pitch of the blades based on temperature, which can increase power and improve processing efficiency.

Motor

Motor Type Mill: WEG W22
Motor Power 500 hp
Motor Torque Max: 1451 ft-lb | PT Tech - Continuously engaged, friction type
Cooling Medium: Air

Drivetrain

Drive System Continuous sprocket | Chain: 120H roller chain | Motor: Open loop / Geroler

Electric

Electrical 24 VDC | System Protection: Fused

Operational

Operating Speed Tub: 10 rpm | Drum: 1785 rpm | Belt: 640 ft/min
Operating Conditions Screen Area: 2714 sq in

Hydraulics

Hydraulic Type System: Open loop
Pump Type Gear
Hydraulic Pump Flow at Maximum RPM: 19.2 gpm
Maximum Pressure System relief pressure: 2800 psi

Chassis

Frame Type Continuous I-beam

Lights and Safety

Safety Features Thrown Object Restraint System: Pivoting tub cover assembly | Tub Cover Positions: 2 | Falling Object Protection at Control Station: Overhead and side protection

Dimensions

Dimensions Tub Table Thickness: .4 in | Table Tilt Degrees: 91 deg | Millbox Opening: 24.2" x 47.9" (61.4 cm x 121.5 cm) | Inside Diameter of Tub: 8 ft | Inside Flare Diameter - At Base of Tub: 8.1 ft | Inside Flare Diameter - At Tub Opening: 12.3 ft | Wall Thickness: .3 in | Drum Diameter: 22.5 in | Tip Diameter: 28.6 in | Drum Skin Thickness: 1.8 in | Cutter Block: 2-bolt 2" x 3" (5.1 cm x 7. 6 cm) narrow | Center Retention Pin Dimensions: 2" (5.1 cm) | Screen: 49.5" x 28.5" x 14.9" (126 cm x 72.4 cm x 37.8 cm) | Breaker Bar: 2.5" x 3" (6.4 cm x 7.6 cm) | Distance - Screen to Millbox Wall: 11 in | Idler Roller Diameter: 8 in | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in
Transport Length Maximum: 29.3 ft
Transport Width Maximum: 8.4 ft
Transport Height Maximum: 11.8 ft
Length Maximum- Conveyor Unfolded: 51.3 ft | Discharge system: 24 ft
Height Loading: 10.6 ft | Electrical Panel: 87 in (Soft Start) / 93 in (VFD) | Loading: 10.6 ft | Discharge system - Load: 14 ft
Width Electrical Panel: 72 in (Soft Start) / 119 in (VFD) | Cutter Block: 3" x 3.5" (7.6 cm x 8.9 cm) wide | Discharge system: 36 in
Depth, Maximum Electrical Panel: 27 in (Soft Start) / 28 in (VFD) | Tub: 5 ft
Cutting Width Drum: 46 in

Capacities

Volume Tub Capacity: 11.3 cu yd
Hydraulic Capacity Tank: 95 gal

Weights

Weight 42080 lbs | Front Mount Pad (Operation): 14800 lbs | Rear Mount Pad (Operation): 30650 lbs | Electrical Panel: 1800 lbs (Soft Start) / 3020 lbs (VFD)| Screen: 400 lbs

Features

Features Tub Roller Quantity: 8 carrier, 8 guide (16 total) | Tub Agitators: 4 | Number of Hammers: 8 | Number of Cutters: 16 | Cutter Block Types: Block style single bolt wide | Number of Wipers: 2 | Return Roller Quantity: 5 standard and 1 vibrating roller | Filtration Method: In-tank return filters (qty 2) | Number of Coolers: 1 | Display Type: Analog hydraulic gauges, LCD multifunction | Switches: Moisture proof, toggle switch
Construction Material Tub Table: T1 Steel | Wall: T1 Steel | Screen: Fabricated from abrasion resistant steel (qty 2) | Breaker Bar Type: T1 steel, replaceable | Discharge system - Splice: Flexco R2 stainless steel
Bearing Hanger Type Spherical roller
Belt Type Discharge system - Design: One piece, 330# with V-cleat
Oil Type Recommended: Hy-Power 68

Product Photography