2025 Vermeer® Low Speed Shredders LS3600TX

Information

2025 Vermeer® Low Speed Shredders LS3600TX

LS3600TX highlights
  • Built for industry leading maintenance access
  • Spend less time fixing and more time shredding
  • Highly adjustable to optimize efficiency and end product sizing
  • Maximized torque delivery to the rotor for efficient waste processing

Features may include:

Ease of maintenance
  • The hydraulically-operated side door provides full exposure to the rotor, comb and belly conveyor to minimize maintenance time. The service area has been designed to allow you to perform maintenance without overhead obstructions.
  • The maintenance-friendly and highly accessible engine bay design includes large access doors, multiple ladder points and a large service platform to help with ease of maintenance and serviceability.
  • The belly conveyor can be removed without detaching the discharge conveyor — allowing for minimally invasive service.
  • The service jog feature at the operator's station allows you to rotate the rotor, enabling necessary maintenance on both the rotor and the tips.
Adjustability
  • The design of the LS3600TX gives your operation versatility with the ability to control the size of the material by adjusting the spacing between the comb and rotor.
  • This 10-ft (3 m) welded rotor comes equipped with a 21-tooth configuration consisting of both tall and short teeth. Reliability and maintenance were kept front of mind — as evident by the dual-bolt quick-change teeth.
  • The comb constantly monitors cylinder pressure and will open when the set pressure is reached, providing protection to the rotor, transmission and driveline.
Productivity
  • The machine features a reversible mechanical transmission for efficient power transfer, maximizing productivity. A torque limiter automatically disengages the drive at max torque to help protect critical components.
Driveline confidence
  • A torque limiter automatically disengages the drive when max torque is experienced — helping protect critical machine components.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Low Speed Shredders LS3600TX
  • C13B
  • Reversing dual clutch
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Feed opening: 88-in (225-cm) | Belly Conveyor System: 41 in | Discharge Conveyor System: 48 in
  • Loading: 10.5 ft | Discharge Conveyor System - Load: 8 ft - 14 ft (2.43 m - 4.3 m)

Specifications

  • 2025
  • Vermeer®
  • Low Speed Shredders
  • LS3600TX
  • General
  • C13B
  • CAT
  • T4F/Stage V
  • 6
  • Gross (Maximum): 456 hp
  • (Maximum): 2082 ft-lb | Limiter: Ball detent
  • Dry-type with primary and secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid (Nitrite-free, pre-diluted 50/50)
  • Belly Conveyor System - Drive: Fixed displacement | Discharge Conveyor System - Drive: Fixed displacement | Belly Conveyor: Orbital | Fan Drive: Series 40 - axial piston | Track Drive: Bent axis piston
  • Max Fuel Consumption: 19.3 gph
  • Ultra-low sulfur diesel (<15 ppm)
  • Reversing dual clutch
  • Single caliper disk | Track: Hydraulic release
  • 8D-MHD, 1,400 CCA (qty. 2) | Radio Remote Control: AA (qty. 6)
  • 24 V, 150 A
  • 24 V | System Protection: Fused
  • Rotor: 30 rpm | Tip: 310 ft/min | Belly Conveyor System - Belt: 784 ft/min | Discharge Conveyor System - Belt: 824 ft/min | Track Max high: 1.7 mph | Track Low Travel: 1.2 mph
  • Air to boil temperature: 134° F (56° C)
  • 112.9 db(A)
  • Implement - System: Open loop | Belly Conveyor - System: Closed loop | Discharge Conveyor- System: Closed loop | Fan Drive - System: Closed loop
  • Implement: 23/8 CC tandem | Belly Conveyor: Variable piston | Discharge Conveyor: Variable piston | Fan Drive: Variable piston | Track Drive Pump Type: Closed loop
  • Implement - Flow at Maximum rpm: 12.7 gpm/4.4 gpm (61.9 L/min / 16.6 L/min) | Belly Conveyor - Flow at Maximum RPM 32.5 gpm | Discharge Conveyor - Flow at Maximum rpm: 32.5 gpm | Fan Drive - Flow at Maximum rpm: 16.3 gpm | Track Flow at Maximum rpm: 29.4 gpm
  • Implement - System relief: 2900 psi | Belly Conveyor - System: 3336 psi | Discharge Conveyor - System: 3336 psi | Fan Drive - System relief: 3626 psi | Tracks System relief: 4061 psi | Track Width Option One - Ground Bearing Pressure - Soft Ground: 15.4 psi
  • Unit body construction
  • Tip Diameter: 39.5 in | Short tip diameter: 36.8 in | Rotor skin thickness: 1.3 in | Wear Plate Thickness: .5 in | Belly Conveyor System - Drive pulley diameter: 9 in | Belly Conveyor System - Tail pulley diameter: 9 in | Discharge Conveyor System - Tail pulley diameter: 12 in | Discharge Conveyor System - Drive pulley diameter: 12.8 in | Radio Remote Control - Operating Range
  • Maximum: 28 ft
  • Maximum: 8.3 ft
  • Maximum: 11.5 ft
  • Infeed: 86 in
  • Infeed hopper: 44 in | Hopper extension: 3 in
  • Maximum - working: 47.3 ft | Infeed hopper (with extension): 145.8 in | Hopper extension: 67 in | Feed opening: 145.75-in (370-cm) | Belly Conveyor System: 12.8 ft | Discharge Conveyor System: 22.3 ft
  • Loading: 10.5 ft | Discharge Conveyor System - Load: 8 ft - 14 ft (2.43 m - 4.3 m)
  • Feed opening: 88-in (225-cm) | Belly Conveyor System: 41 in | Discharge Conveyor System: 48 in
  • Extension: 18 in | Extension loading: 11.2 ft
  • 24.5 in
  • 10.1 ft
  • Axle to idler-sprocket: 10.86 ft (3.31 m)
  • 17.7 in (45 cm)
  • Tank: 146 gal | Diesel exhaust fluid capacity: 17.3 gal
  • Volume with Filter: 45 qt
  • Fan: Multi-wing (variable pitch) | Fan - CAC: Electric (variable speed) | Planetary type: Gearbox | Number of mounts: 21 | Number of Tips: 21 | Tip types: Tall/short | Belly Conveyor System Splice: Continuous | Discharge Conveyor System - Return Roller Quantity: 2 | Hydraulic System - Filtration Method: Dual in-tank return filters | Number of Coolers: 1 | Implement Hydraulics - Components: Nine section | Fan Drive - Fan type (FWD/REV): Multi-wing (variable pitch) | Control Station - Display Type: LCD touchscreen | Control Station - Switches: Sealed membrane CAN bus keypad | Radio Remote Control - Display Type: LCD | Radio Remote Control - Switches Sealed membrane | Radio Remote Control - Channel Setting: 50 channels | Track Type: N.1 FL6 triple grouser / Type: of Idler FL6 track roller | Number of Idlers: 9
  • Infeed: 10.2 cu yd
  • Hydraulic System - Tank: 40 gal
  • Maximum: 71650 lbs | Rotor: 5700 lbs
  • Recommended: API CJ-4, 15W-40 | Hydraulic System - Recommended: Vermeer HyPower 68
  • Belly Conveyor System Design: 1-ply — 330# with V-cleat — steel mesh | Discharge Conveyor System - Design: 3-ply — 330# with V-cleat
  • Hopper extension: Integrated steel with hydraulic cylinder | Discharge Conveyor System - Splice: R2 stainless steel cable