2025 Vermeer® Stump Cutters SC802 

Information

2025 Vermeer® Stump Cutters SC802

SC802 highlights
  • The tow-behind powerhouse
  • Designed for productive performance
  • Maximized cutting dimensions

Features may include:

Powerful performance
  • Tackle large tasks effortlessly with the SC802 stump cutter, powered by a robust 74-hp (55.2-kW) turbo-charged engine.
  • SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.
  • A 96-in (243.8 cm) straight-line cutting capacity provides extensive coverage, minimizing the need to reposition the machine.
Capable design
  • Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.
  • Independent rubber torsion suspension.
  • A 60-in (152.4-cm) tongue extension helps reduce the amount of repositioning needed on a jobsite.
Maximized efficiency
  • The 68-ft3 (1.9-m3) containment area under the rear deck collects chips as you work, helping you clean up the job faster.
  • A 25-gal (94-L) fuel tank means you can spend less time fueling up and more time grinding on the job.
Operator safety
  • The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
  • The swing out control station helps protect the operator from thrown objects while providing optimal visibility at the stump.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Stump Cutters SC802 
  • TD2.9L
  • Control Station Description: Swing-out
  • Diesel
  • Available
  • 79.8 in
  • 79 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC802 
  • Stump
  • TD2.9L
  • Deutz
  • Tier 4 Final
  • 4
  • Gross (Maximum): 74 hp
  • 188 ft-lb
  • Dry-type with precleaner, restriction indicator, evacuator valve and safety element
  • Spin-on
  • Medium: Air-cooled head, oil-cooled block
  • Max Fuel Consumption: 4.6 gph
  • Diesel
  • Electric clutch with brake
  • Upper: Straight bevel | Lower: Straight bevel
  • Rubber dampened with 2 universal joints | U Joints: Two standard with double lip seal
  • Axle: Rubber torsional axle
  • Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
  • ST235/80/R16 load range G
  • 16 in x 6 in (40.6 cm x 15.2 cm) 6 bolt circle
  • 12 Volt
  • 95 amp
  • System Voltage: 12 Volt
  • Cutterwheel: 881 rpm
  • 108.0 dB(a)
  • System Type: Gear pump, pressure balanced | Filtration Method: 6 micron full flow return filter; suction strainer
  • Pump Flow at Maximum RPM: 3.2 gpm
  • System relief: 2000 psi
  • Control Station Description: Swing-out
  • Reinforced 4" (10.2 cm) square tubing
  • Pin, pintle, 2 1/6" (1.6 cm) ball
  • Trailer Light Type: LED
  • Maximum Angle of Continuous Operation: 30 deg | Cutterwheel Diameter: 28 in | Cutterwheel Thickness: .9 in | Cutterwheel Straight Line: 96 in | Cutterwheel Cut Above Ground: 35 in | Cutterwheel Cut Below Ground: 25 in | Tongue Extension: 60" (152.4 cm)
  • 167.3 in | Tongue: 167.3 in | Tongue Extended: 234 in
  • 79.8 in
  • 79 in
  • Tank: 25 gal
  • Tank: 6 gal
  • Volume with Filter: 10.6 qt | Cutterwheel Drive: 1.7 qt | Lower Gearbox: 2.2 qt
  • Chip Containment: 68 cu ft
  • 400 lbs | Tongue: 460 lbs
  • Tooth: Yellow Jacket™ cutter system | Number of Teeth: 42 | Number of Indexes: 2 | Number of Pockets: 42 | Fender: Weld-on
  • Recommended Oil: 15W40 Deutz | Cutterwheel Drive: SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | Hydraulic: Vermeer HyPower 68