2025 Vermeer® Brush Chippers BC900XL

Information

2025 Vermeer® Brush Chippers BC900XL

BC900XL highlights
  • Enhanced chipping capabilities
  • Optimal access to key machine maintenance areas
  • Safety features built with the operator in mind

Features may include:

Intelligent feeding
  • SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
  • The large infeed opening simplifies feeding irregular material and reduces the need for crosscuts before feeding the chipper.
Serviceability
  • Designed with ease of maintenance in mind, the BC900XL features a dripless oil filter and conveniently located grease points to help reduce service time.
Safety
  • The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Brush Chippers BC900XL
  • Gasoline
  • Available
  • 79.5 in | Infeed Table: 48 in
  • 97 in | Infeed Hopper: 32 in | Chute: 96.7 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC900XL
  • Brush
  • Briggs and Stratton Vanguard
  • Gross Horsepower (Maximum): 35 hp
  • 53 ft-lb
  • Engine-mounted
  • Spin-on
  • Medium: Air
  • Manufacturer: White | Displacement: 33.1 CID
  • Max Fuel Consumption: 3.2 gph
  • Gasoline
  • Drive Engagement: Clutchless PTO
  • Axle: 3500 lb (1587.6 kg) / 3500 lb (1587.6 kg) with electric brakes
  • ST215/75R14
  • 14" (35.6 cm)
  • Group 24 - 580 CCA
  • 20 amp
  • System Voltage: 12 V
  • Feed: 140 ft/min | Drum/Disc Cutting System: 1500 rpm
  • Actuation Force (BFSB): 34 lbs
  • System: Tandem Center | Filtration Method: 10 micron return
  • At Maximum RPM: 5 gpm
  • System relief: 2500 psi | Auto Reverse: 2300 psi
  • 3925 cfm
  • 3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm)
  • Pintle or ball
  • Maximum Angle of Continuous Operation: 25 deg | Feed Roller Minimum Distance to Drum: 4 in | Infeed Throat Capacity: 9 in x 14 in (22.9 cm x 35.6 cm) | Pinch Point - Distance to End of Feed Table: 65 in | Distance from Feed Table to Ground: 29 in | Infeed Table Material Thickness: .2 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 11 GA / Diameter: 2 in / Material Thickness: .1 in | Drum/Disc Cutting System - Material Capacity: 9 in / Thickness: 1 in / Diameter: 33 in / Knife Size: 5" x 11.75" (12.7 cm x 29.8 cm) / Bedknife Size: 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical / Bedknife Thickness: .8 in | Discharge System - Bottom Thickness: .1 in / Top Thickness: .1 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg | Tongue: 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
  • Feed Table Up, Tongue: 140.4 in | Table Down, Tongue Extended: 154.8 in | Feed Roller: 13.5" long (34.3 cm) | Infeed Table: 26 in
  • 79.5 in | Infeed Table: 48 in
  • 97 in | Infeed Hopper: 32 in | Chute: 96.7 in
  • Feed: 15.8" (40 cm)
  • 2.2 in
  • Tank: 16 gal
  • With Filter: 2.9 qt
  • Tank: 6.8 gal
  • Feed Roller Clamp: 560 lbs
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Dual green hold-to-run buttons | Four positions: Emergency stop, forward, stop and reverse | Safety Lock - Number of Positions: 6 | Fixture: Method Bolt-on | Useable Edges: 2 | Bedknife - Number of Useable Edges: 2 | Cutter Drive - Type: Dual spherical roller / Number of Bearings: 2 / Manufacturer: Linkbelt / Rotation Type: Manual dual handles with pin lock
  • 3060 lbs | Tongue: 320 lbs | Feed Roller: 210 lbs | With Shaft: 330 lbs
  • Recommended: 10W30 / Vermeer VMF Gold
  • Drum/Disc Cutting System: A8 chipper steel | Bedknife: Grade 50
  • Feed System: 12 | Drum/Disc Cutting System: 2 / Bolts/Knife: 5
  • 2
  • Chipper - Polyester Cord with wrap