2025 Vermeer® Brush Chippers BC700XL

Information

2025 Vermeer® Brush Chippers BC700XL

BC700XL highlights
  • Move from jobsite to jobsite with ease
  • Maximum productivity while minimizing maintenance
  • Safety features designed with the operator in mind

Features may include:

Transport with ease
  • Easily move from jobsite to jobsite with the smallest member of the Vermeer brush chipper line.
Intelligent feeding
  • A large infeed opening simplifies feeding irregular material and reduces the need for crosscuts before feeding the chipper.
  • SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
Safety
  • The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism in an emergency.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Brush Chippers BC700XL
  • ECH740
  • Gasoline
  • Available
  • 71 in | Infeed Table: 41.2 in | Drum/Disc Cutting System: 8 in
  • 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC700XL
  • Brush
  • ECH740
  • Kohler
  • Gross Horsepower (Maximum): 25 hp
  • 41.7 ft-lb
  • Kohler HD 2-Stage Dry
  • Spin-on
  • Medium: Oil/Air
  • Manufacturer: White Hydraulics | Displacement: 14
  • Max Fuel Consumption: 2.4 gph
  • Gasoline
  • Manual
  • Axle: 2000 lb/(907.2 kg) rubber torsion axle / 2000lb/(907.2 kg) rubber torsion axle with electric brakes
  • ST185/80D13 load range D
  • 13 x 5, bolt circle 5 on 4.5
  • Group 26, 400 CCA
  • 20A Charging
  • System Voltage: 12 Volt
  • Feed: 49.4 ft/min | Drum/Disc Cutting System: 1748
  • System: Open center | Filtration Method: Return flow filtration, 10 micron
  • At Maximum RPM: 3.8 gpm
  • System relief: 2500 psi
  • 5000 cfm
  • 3/16"/(.5 cm) ASTM A1011 steel
  • 2"/(5.1 cm) ball coupler
  • Maximum Angle of Continuous Operation: 25 deg | Feed Roller Minimum Distance to Drum: 4 in | Infeed Throat Capacity: 6" x 8" (15.24 cm x 20.32 cm) | Pinch Point - Distance to End of Feed Table: 65.4 in | Distance from Feed Table to Ground: 28.1 in | Distance from Feed Table to Ground: 28.1 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 12" (30.48 cm) / Diameter: 2 in / Material Thickness: .1 in | Drum/Disc Cutting System - Material Capacity: 6 in / Thickness: 1.3 in / Diameter: 23.9 in / Knife Thickness: .6 in / Bedknife Size: 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert | Discharge System - Bottom Thickness: .1 in / Top Thickness: .1 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 240 deg | Fender: .1"/(.3 cm) Steel bolt-on
  • Feed Table Up, Tongue: 115 in | Table Down, Tongue Extended: 136 in | Infeed Table: 30.2 in
  • 71 in | Infeed Table: 41.2 in | Drum/Disc Cutting System: 8 in
  • 102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in
  • Feed: 10"
  • 1.5 in
  • Tank: 6 gal
  • With Filter: 2 qt
  • Tank: 6.8 gal
  • Feed Roller Clamp: 525 lbs
  • Feed Roller Orientation: Horizontal | Feed Roller Clamp Type: Spring/Feed Roller Weight | Reset Method: Dual green hold-to-run buttons | Four position: (E-Stop), Forward, Stop, (Reverse) | Fixture Method: Welded | Cutter Drive - Type: Flange-mounted ball type, self-aligning / Manufacturer: Linkbelt / Belt Idler/ Tensioner: Spring-loaded adjustable Idler | Rotation Type: Manual
  • 1800 lbs | Tongue: 180 lbs | Feed Roller: 100 lbs | With Shaft: 176 lbs
  • Recommended: Kohler oil or API CH4/SJ / Vermeer VMF Gold
  • Drum/Disc Cutting System: A8 Chipper Steel
  • 2-band 5-V profile Aramid