2025 Vermeer® Brush Chippers BC2100XL

Information

2025 Vermeer® Brush Chippers BC2100XL

BC2100XL Tier 4 Final highlights
  • Designed to tackle large-tough jobsite conditions
  • Warranty backed by confidence
  • Intelligent chipping for increased productivity

Features may include:

Powerful gas engine
  • A 275-hp (202.3-kW) Cummins® diesel engine provides all the power needed for tough, demanding jobs.
  • Offset horizontal feed rollers, coupled with a robust pulling force, facilitate ease of material feeding and reduce the need for manual control of the upper feed roller when chipping large-diameter material.
Intelligent feeding
  • The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
  • With a 21-in (53.3-cm) capacity and one of the largest infeed tables in its class, the BC2100XL allows for smooth feeding of large material.
  • The exclusive SmartCrush system provides increased down pressure on the material being fed and assists when feeding forked or branchy material.
  • SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
Safety
  • The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Brush Chippers BC2100XL
  • QSB
  • Ultra-low sulfur diesel
  • Available
  • 95.8 in | Infeed Table: 72 in | Drum/Disc Cutting System: .5 in
  • 116.5 in | Infeed Hopper: 38.5 in | Chute: 116 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC2100XL
  • Brush
  • QSB
  • Cummins
  • 6.7 L
  • 6
  • Tier 4 Final
  • Gross Horsepower (Maximum): 275 hp
  • 730 ft-lb
  • DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element
  • Spin-on
  • Medium: Liquid
  • Manufacturer: Eaton | Displacement: 4.9 CID
  • Max Fuel Consumption: 14 gph
  • Ultra-low sulfur diesel
  • Drive Engagement: Clutchless PTO
  • Axle: Tandem torsion 8000 lb (3628.7 kg) capacity
  • Electric
  • 17.5" x 6.75" B.C. of 8 on 6.5" (16.5 cm)
  • 2 - 950 CCA
  • 130 amp Delco-Remy 245I
  • System Voltage: 12 volts
  • Feed: 100 ft/min | Drum/Disc Cutting System: 1084 rpm
  • Actuation Force (BFSB):
  • System: Open center | Filtration Method: 10 micron return, 100 mesh suction | Discharge System - Bottom Thickness: .1 in Top Thickness: .2 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg
  • At Maximum RPM: 13 gpm
  • System relief: 2750 psi | Auto Reverse: 2550 psi
  • 3600 cfm
  • 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
  • 3 " (7.6 cm) pintle
  • LED
  • Maximum Angle of Continuous Operation: 30 deg | Fan: 26" (66 cm) suction | Tongue Extension: Two position 12" extension (30.5 cm) | Feed Roller Minimum Distance to Drum: 10 in | Feed Roller: 19 " (48.3 cm) | Infeed Throat Capacity: 40 in x 24 in | Distance from Feed Table to Ground: 30.8 in | Infeed Table Material Thickness: .4 in | Drum/Disc Cutting System - Material Capacity: 21 in / Thickness: 28 in / Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 5 " x 14 " (12.7 cm x 35.6 cm) | Bedknife Size: 3 " x 27.5 " (7.6 cm x 69.9 cm)
  • Feed Table Up, Tongue: 235 in | Table Down, Tongue Extended: 259 in | Infeed Table: 60.5 in
  • 95.8 in | Infeed Table: 72 in | Drum/Disc Cutting System: .5 in
  • 116.5 in | Infeed Hopper: 38.5 in | Chute: 116 in
  • 3.4 in
  • Tank: 65 gal
  • With Filter: 17.6 qt
  • Tank: 24 gal
  • Feed Roller Clamp: 3500 lbs
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller: Clamp Type Hydraulic | Reset Method: Green-hold-to-run button | Positions: 4: E-stop, Forward, Neutral, and Reverse | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Cutter Drive - Type: Spherical roller / Manufacturer: Dodge / Belt Idler/Tensioner: Torsion arm spring-loaded | Rotation Type: Hydraulic
  • 16200 lbs | Tongue: 2950 lbs | Feed Roller: 972 lbs | With Shaft: 1500 lbs
  • Recommended: API CJ-4 / Vermeer Hy-Power 68
  • Drum/Disc Cutting System: 4 / Bolts/Knife: 6
  • Drum/Disc Cutting System: A8 chipper steel
  • 4
  • 5V chipper poly type