2025 Vermeer® BC1800XL Tier 4 Final 139 HP
- Year 2025
- Make Vermeer®
- Model BC1800XL Tier 4 Final
- Engine 4045HFC04
2025 Vermeer® BC1800XL Tier 4 Final 139 HP
2025 Vermeer® BC1800XL Tier 4 Final 139 HP
BC1800XL Tier 4 Final highlights- Built for jobsites with large-diameter chipping
- Intelligent chipping for increased productivity
- Take control when the jobsite demands it
Features may include:
Powerful and control- Minimize vibration and structural stress on the rear of the machine with vertical feed rollers featuring helical cleats that firmly grip the material.
- Ideal for land-clearing and tree care operations, the BC1800XL is available with a powerful 173-hp (129-kW) John Deere® Tier 4 Final engine
- SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
- The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
- The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
- VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.
Engine
Engine Manufacturer
John Deere
Engine
4045HFC04
Emissions
Tier 4 Final
Cylinder Liners
4
Engine Power
Gross Horsepower (Maximum): 139 hp
Engine Torque, Maximum
398 ft-lb
Motor
Motor Type
Manufacturer: White RE470 | Displacement: 28.4
Fuel System
Fuel Type
Diesel
Suspension
Suspension
Axle: Torflex
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Rear Specification
235/75R17.5 load range H
Wheels
17.5" x 6.75" BC of 8 on 6.5"
Battery
Battery
950 cca
Electric
Alternator
90
Electrical
System Voltage: 12
Operational
Operating Speed
Feed: 117 ft/min | Drum/Disc Cutting System: 1100
Hydraulics
Hydraulic Type
System: Open Center | Filtration Method: 3 micron return, 100 micron suction
Hydraulic Pump
At Maximum RPM: 6.3 gpm
Maximum Pressure
System relief: 2800 psi | Auto Reverse: 2400 psi
Airflow
3544 cfm
Chassis
Frame Type
7" x 2.13" Channel
Hitch/Type
Pintle
Lights and Safety
Lighting
LED
Dimensions
Dimensions
Feed Roller: 23.5" x 18 | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in / Infeed Table Material Thickness: .2 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 11 GA / Diameter: 2 in / Material Thickness: 11 in | Drum/Disc Cutting System - Material Capacity: 19 in / Thickness: 26.1 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .3 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg | Tongue: 4 x 4 x 0.375 | Tongue Extension: Two 12" Increments (for non winch)
Length
Feed Table Up, Tongue: 177 in | Table Down, Tongue Extended: 231 in | Infeed Table: 36 in
Width
78.5 in| Infeed Table: 67 in | Drum/Disc Cutting System: .5 in
Height
107 in | Infeed Hopper: 34 in | Chute: 110 in
Capacities
Hydraulic Capacity
Tank: 12 gal
Load Capacity, Land
Feed Roller Clamp: 380 lbs
Weights
Weight
9600 lbs (without winch and hydraulic jack) | 10366 lbs (with winch, hydraulic jack and hydraulic chute) | With Shaft: 1160 lbs
Features
Features
Feed System - Feed Roller Orientation: Vertical / Number of Feed Rollers: 2 / Feed Roller Clamp Type: Spring / Number of Feed Roller Motors: 2 | Safety System - Reset Method: Green Hold to Run Button / Positions: 4: E-Stop, Forward, Neutral, Reverse | Drum/Disc Cutting System - Safety Lock - Number of Positions: 4 / Useable Edges: 2 / Fixture Method: Weld on / Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Rotational Lock: Self Lock
Oil Type
Recommended: Vermeer VMF
Knife Quantity
Feed System: (2) 11 | Drum/Disc Cutting System: 4 / Bolts/Knife: 5
Construction Material
Drum/Disc Cutting System: A8 Modified Chipper Steel | Bedknife Material: 1018 CD / Belt Idler/Tensioner: Spring loaded
Paddle Quantity
12