2025 Vermeer® Brush Chippers BC1800XL Gas
- Year 2025
- Make Vermeer®
- Model Brush Chippers
2025 Vermeer® Brush Chippers BC1800XL Gas
2025 Vermeer® Brush Chippers BC1800XL Gas
BC1800XL Gas highlights- Built with strength for demanding conditions
- Provides ability to feed with confidence
- Performance ready for large takedowns
Features may include:
Powerful and control- The BC1800XL is equipped with vertical feed roller technology to help aid in machine loading and the feeding of adverse materials.
- Experience powerful yet efficient feeding thanks to the Origin® 6.2L gasoline powered engine.
- SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
- The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
- The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
- VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.
Engine
Engine Manufacturer
Origin
Displacement
6.2L
Cylinder Liners
8
Engine Power
Gross Horsepower (Maximum): 172 hp
Engine Torque, Maximum
322 ft-lb
Air Cleaner
2 Stage Dry
Oil Filter
Spin-on
Cooling
Medium: Liquid
Motor
Motor Type
Manufacturer: White RE470 | Displacement: 28.4
Fuel System
Fuel System
Max Fuel Consumption: 11.7 gph
Fuel Type
Gas
Drivetrain
Clutch
13" Spring Loaded Clutch | Drive Engagement: Manual Lever
Suspension
Suspension
Axle: Torflex
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Rear Specification
235/75R17.5 load range H
Wheels
17.5" x 6.75" BC of 8 on 6.5"
Battery
Battery
950 cca
Electric
Alternator
70
Electrical
System Voltage: 12
Operational
Operating Speed
Feed: 117 ft/min | Drum/Disc Cutting System: 1100
Operating Conditions
Actuation Force (BFSB):
Performance
Noise Level
124
Hydraulics
Hydraulic Type
System: Open Center | Filtration Method: 3 micron return, 100 micron suction
Hydraulic Pump
At Maximum RPM: 6.3 gpm
Maximum Pressure
System relief: 2850 psi | Auto Reverse: 2650 psi
Airflow
3544 cfm
Chassis
Frame Type
7" x 2.13" Channel
Hitch/Type
Pintle
Lights and Safety
Lighting
LED
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 20 deg | Fan: 18.7 | Feed Roller: 23.5" x 18" | Feed Roller (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Tongue: 4 x 4 x 0.375 | Tongue Extension: Two 12" Increments (for non winch) | Discharge System - Bottom Thickness: .1 in / Top Thickness: .2 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg | Drum/Disc Cutting System - Material Capacity: 19 in / Thickness: .5 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 0.625 x 5 x 10 / Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in
Length
Feed Table Up, Tongue: 177 in | Table Down, Tongue Extended: 231 in | Infeed Table: 36 in
Width
78.5 in | Infeed Table: 67 in | Drum/Disc Cutting System: 26.2 in
Height
107 in | Infeed Hopper: 34 in | Chute: 110 in
Bore
2.9 in
Capacities
Fuel Capacity
Tank: 50 gal
Oil capacity
With Filter: 5 qt
Hydraulic Capacity
Tank: 12 gal
Load Capacity, Land
Feed Roller Clamp: 380 lbs
Features
Coolant Capacity (Engine and Radiator): 5 gal | Dynamic Capacity: 41800 lbs | Static Capacity: 71500 lbs
Weights
Weight
8800 lbs (without winch and hydraulic jack) | 9300 lbs (with winch, hydraulic jack and hydraulic chute) | Feed Roller: 116 lbs | With Shaft: 1160 lbs
Features
Features
Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Rotation Type: Worm gear with rotational lock | Rotational Lock: Self Lock | Cutter Drive - Type: Spherical roller / Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Number of Bearings: 2 | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4
Oil Type
Recommended: API / Vermeer VMF
Knife Quantity
Feed System: 11 | Drum/Disc Cutting System: 4 / Bolts/Knife: 5
Construction Material
Drum/Disc Cutting System: A8 Modified Chipper Steel | Bedknife: 1018 CD
Paddle Quantity
12
Belt Type
5V