2025 Vermeer® BC1000XL Tier 4 Final 74 HP

Information

2025 Vermeer® BC1000XL Tier 4 Final 74 HP

BC1000XL Tier 4 Final highlights
  • Versatility where it matters most
  • Feed with machine intelligence for maximum productivity
  • Safety features designed with the operator in mind

Features may include:

Powerful engine options
  • Designed for the modern where you are, the BC1000XL offers a choice of Tier 4 Final engines — 49 hp or 74 hp (36.4 kW or 55 kW) — that comply with emission regulations.
Get more done
  • Spend less time maintaining with a clutchless PTO system that helps prevent premature wear on the belt drive by only allowing engagement at low idle.
  • The BC1000XL comes with a 25-gal (94.6-L) fuel tank that lets you put in more hours before refueling.
Intelligent feeding
  • The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
  • SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
Safety
  • The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • BC1000XL Tier 4 Final 74 HP
  • D2.9L
  • Diesel
  • Available
  • 66.5 in | Infeed Table: 52 in | Infeed Throat Capacity: 17" (43.2 cm) | Drum/Disc Cutting System: 20 in
  • 101 in | Infeed Hopper: 12 in | Infeed Throat Capacity: 12" (30.5 cm) | Chute:101 in

Specifications

  • 2025
  • Vermeer®
  • BC1000XL Tier 4 Final
  • 74 HP
  • Brush
  • D2.9L
  • Deutz
  • Tier 4 Final
  • 4
  • Gross Horsepower (Maximum): 74 hp
  • 181 ft-lb
  • 2-stage dry with safety element
  • Spin-on
  • Medium: Liquid
  • Manufacturer: White| Displacement: 28.3
  • Max Fuel Consumption: 4.6 gph
  • Diesel
  • Clutchless PTO | Drive Engagement: Belt tensioner
  • Axle: Torsion
  • Standard electric
  • ST235/80/R16 Load Range E
  • 16" (40.6 cm)
  • Group 31; 950 CCA
  • 95 Amp
  • System Voltage: 12 Volt
  • Feed: 105 ft/min | Drum/Disc Cutting System: 2050 rpm
  • Actuation Force (BFSB): 34 lbs
  • System: Tandem center | Filtration Method: 10 micron return; 100 micron suction
  • At Maximum RPM: 2.7 gpm
  • System relief: 2500 psi
  • 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
  • Pintle
  • LED
  • Maximum Angle of Continuous Operation: 30 deg | Fan: 18.625" (47.3 cm) suction | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 11 GA | Drum/Disc Cutting System - Material Capacity: 12 in / Thickness: .4 in / Diameter: 20 in / Knife Thickness: .6 in | Knife Size: 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Chute Rotation Angle: 270 deg |Tongue: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) | Tongue Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • Feed Table Up, Tongue: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
  • 66.5 in | Infeed Table: 52 in | Infeed Throat Capacity: 17" (43.2 cm) | Drum/Disc Cutting System: 20 in
  • 101 in | Infeed Hopper: 12 in | Infeed Throat Capacity: 12" (30.5 cm) | Chute:101 in
  • 2.4 in
  • Tank: 25 gal
  • With Filter: 8.4 qt
  • Tank: 7 gal
  • Feed Roller Clamp: 350 lbs
  • Feed System - Feed Roller Orientation: Horizontal / Number of Feed Rollers: 1 / Number of Feed Roller Motors: 1 | Safety System - Reset Method: Green hold-to-run button / Positions: 4: E-stop, forward, neutral and reverse | Drum/Disc Cutting System - Safety Lock - Number of Positions: 2 / Fixture Method: Weld-on / Bedknife - Number of Useable Edges: 4 | Cutter Drive - Number of Bearings: 2 / Type: Spherical rollers / Manufacturer: Linkbelt | Rotation Type: Rotation handle with pin lock | Switches: Feed Stop Bar Sensitivity, Droop, Ecoldle | Controller: Vermeer ACS | Display: Multifunctional display (MFD)
  • 4995 lbs | Tongue: 600 lbs | Feed Roller: 400 lbs | With Shaft: 460 lbs
  • Recommended: 10W30 / Vermeer VMF
  • Feed System: 2 | Drum/Disc Cutting System: 2 / Bolts/Knife: 4
  • Drum/Disc Cutting System: A8 chipper steel
  • 5
  • 5V