2025 Vermeer® Brush Chippers AX19

Information

2025 Vermeer® Brush Chippers AX19

AX19 highlights
  • Built with the performance needed for a variety of tough jobs
  • Enhanced productivity with mechanical feeding
  • Operator convenience to boost jobsite efficiency

Features may include:

Robust performance
  • A fixed infeed table design and oversized infeed opening gives the operator optimal performance and durability when mechanically feeding.
  • The AX19 delivers maximum pull-in force, making feeding of large-diameter logs and branchy limbs easier.
  • The AX19 is built to handle large land-clearing operations and other tough jobs that require high feed capacity and throughput.
Intelligent feeding
  • The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
  • SmartCrush minimizes down pressure until the feed roller climbs onto the material, then increases pressure to push it to the cutter drum, allowing the operator to focus on the next load.
  • Dual offset horizontal feed rollers lessen the need for the operator to manually control the machine when feeding large-diameter logs.
  • SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
Jobsite efficiency
  • The winch operates with or without the easily removable boom. Removing the boom lets operators feed the chipper mechanically without interference.
Safety
  • The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Brush Chippers AX19
  • 4045HFC09
  • Diesel
  • Available
  • 79 in | Infeed Table: 71 in | Infeed Throat Capacity: 28.875" wide
  • 108 in | Infeed Hopper: 35 in | Infeed Throat Capacity: 24" tall | Chute: 108 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • AX19
  • Brush
  • 4045HFC09
  • John Deere
  • 4
  • Gross Horsepower (Maximum): 173 hp
  • 492 ft-lb
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • Manufacturer: White RE470 | Displacement: 28.4
  • Max Fuel Consumption: 6.8 gph
  • Diesel
  • 12" Spring Loaded | Drive Engagement: Manual Lever
  • Axle: Tandem Torsion 7000 lb capacity
  • Electric
  • LT285/75R16 Load Range E
  • 16"
  • 950 CCA
  • 90
  • System Voltage: 12
  • Feed: 119 ft/min | Drum/Disc Cutting System: 1100
  • Actuation Force (BFSB): 34 lbs | Actuation Force: 34 lbs
  • System: Open Center | Filtration Method: 6 micron return, 100 micron suction
  • At Maximum RPM: 14.8 gpm
  • System relief: 3000 psi | Auto Reverse: 2800 psi
  • 7.5" Z-Channel x 0.25" Thick
  • Pintle
  • LED
  • Maximum Angle of Continuous Operation: 30 deg | Fan: 26" Suction | Feed Roller Minimum Distance to Drum: 5 in | Distance from Feed Table to Ground: 30.3 in | Infeed Table Material Thickness: .3 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Safety System - Diameter: 1.5 in / Material Thickness: 11 in | Drum/Disc Cutting System - Material Capacity: 19 in / Thickness: 26.1 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" / Bedknife Thickness: 1.3 in | Discharge System - Bottom Thickness .1 in / Top Thickness .2 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg | Tongue: 5" x 3" x 0.375" | Tongue Extension: Extendable 12"
  • Feed Table Up, Tongue: 224 in | Table Down, Tongue Extended: 236 in | Feed Roller: 28.25 | Infeed Table: 60.5 in
  • 79 in | Infeed Table: 71 in | Infeed Throat Capacity: 28.875" wide
  • 108 in | Infeed Hopper: 35 in | Infeed Throat Capacity: 24" tall | Chute: 108 in
  • Feed: 19" dia / 11" dia
  • 2.5 in
  • Tank: 40 gal
  • With Filter: 15.5 qt
  • Tank: 20 gal
  • Feed Roller Clamp: 4000 lbs
  • Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Number of Feed Roller Motors: 4 | Reset Method: Green Hold to Run Button | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Cutter Drive - Type: Spherical Roller / Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Rotation Type: Worm gear with | Rotational lock Rotational Lock: Self lock | Controller: Vermeer ACS: C248 | Display: MFD
  • 11000 lbs (without winch and hydraulic jack) | 11400 lbs (with winch, hydraulic jack and hydraulic chute) | Feed Roller: 350 lbs / 186 lbs | With Shaft: 1160 lbs
  • Recommended: ACEA E-7 & E-6 or API CI-4 / HY POWER 68
  • Feed System: 12 / 10 | Drum/Disc Cutting System: 4 / Bolts/Knife: 5
  • Drum/Disc Cutting System: A8 Modified Chipper Steel | Bedknife: 1018 CD
  • 12
  • 5V