2025 Vermeer® Surface Miners T1255III - Chain Drive

Information

2025 Vermeer® Surface Miners T1255III - Chain Drive

T1255III Chain Drive highlights
  • Get in and extract material close to the high wall – this attachment gives you the capability to cut along a vertical high wall
  • The chains are driven by low-speed, high-torque hydrostatic motors
  • Conduct surface mining extraction, remove ground surface, or create a smooth, level area for site preparation

Features may include:

More production with high wall capability
  • Using a single-drive motor to power the drum allows for the ability to cut an 80° high wall compared to the 45° high wall when using the dual drive attachment.
Advanced technology for improved machine efficiency
  • SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Maximized engine productivity
  • Load control allows the machine to automatically adjust ground speed to use full engine horsepower, thus maximizing productivity.
Elevated operator visibility and comfort
  • The elevating cab allows optimal visibility and added comfort with the air ride seat. The sealed cab has self-contained heating and air conditioning with sound-attenuating foam. It is also a rollover module (ROM).

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Surface Miners T1255III - Chain Drive
  • C18 ACERT
  • Available
  • Ranges: 134" (340.4 cm)
  • Range: 146 (370.8 cm)

Specifications

  • 2025
  • Vermeer®
  • Surface Miners
  • T1255III - Chain Drive
  • Cold Planers
  • C18 ACERT
  • Caterpillar
  • Tier 3 / Tier 4 Final
  • Gross: 600 hp
  • Tier 3: 2100 RPM / Tier 4 Final: 2000 RPM
  • 6
  • Dry-type with precleaner
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full flow
  • Tier 3: 31.8 gph / Tier 4 Final: 30.5 gph
  • Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Range: Tier 3 - 11.6 hours / Tier 4 Final - 12.1
  • Maximum Ground - Low: 48.1 ft/min / High: 128.4 ft/min
  • Minimum: 15.5 psi | Maximum: 21.1 psi
  • Pressure-and-flow-compensated (load-sensing)
  • Flow at Maximum RPM: 28.7 gpm
  • Setting: 2500 psi
  • Approach Angle: 15 deg | Maximum Engine Operating Angle: 35 deg
  • With 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 43 ft | With 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 45.5 ft | With 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 48 ft | 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 48.8 ft | With 50" (127 cm) End Idler and 16 ft (4.88 m) Boom (with Restraint Bar): 51.3 ft | With 50" (127 cm) End Idler and 18 ft (5.49 m) Boom (with Restraint Bar): 53.8 ft
  • Range: 146 (370.8 cm)
  • Ranges: 134" (340.4 cm)
  • 181.5 in
  • Pad Ranges: 30" (76.2 cm)
  • Tank: 370 gal
  • Tank: 210 gal
  • Range: 150,000 lb - 205,000 lb (68,039.9 kg - 92,986.4 kg)
  • Control System: TEC Plus with SmartTEC
  • Drive: Dual path hydrostatic with planetary transmission | Pad: Double grouser | Size: Cat 375 Excavator
  • HyPower 68, HyPower 100, Hy Power 1100