2025 Vermeer® Surface Miners T1055III

Information

2025 Vermeer® Surface Miners T1055III

T1055III highlights
  • Ideal for large rock excavation applications including surface mining, overburden removal, site preparation and road demolition
  • Equipped with a Caterpillar® C13 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site
  • Pair this with a top-down cutting system to achieve greater rock penetration

Features may include:

Advanced technology for improved machine efficiency
  • SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Superior ground penetration and low chain wear
  • A rotary power trencher drive motor and splined headshaft produce a low speed and high torque which provide maximum ground penetration and low chain wear for optimal production results.
Elevated operator visibility and comfort
  • The elevating rollover protective module cab features LEXAN glass, filtered and pressurized air, heating and air-conditioning. The cab’s vantage point allows an optimal view of the boom, trench and conveyor.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Surface Miners T1055III
  • C13 ACERT
  • Available
  • Ranges: 116 " - 122 " (294.6 cm - 309.9 cm)
  • Range: 135 " (342.9 cm)

Specifications

  • 2025
  • Vermeer®
  • Surface Miners
  • T1055III
  • Cold Planers
  • C13 ACERT
  • Caterpillar
  • Tier 3 / Tier 4 Final
  • Gross: 415 hp
  • 2100 RPM
  • 6
  • Tier 3: Dry-type exhaust aspirated / Tier 4 Final: Dry-type with pre-cleaner
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full flow
  • Tier 3: 20.9 gph / Tier 4 Final: 21.3 gph
  • Parking and Emergency Brake: Spring applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Range: Tier 3 - 9.58 hours / Tier 4 Final - 9.39 hours
  • Maximum Ground - Low: 57.1 ft/min / High: 114 ft/min | Conveyor Belt Range:
  • Minimum: 9.4 psi | Maximum: 13.9 psi
  • Pressure and flow compensated (load sensing)
  • Flow at Maximum RPM: 27.9 gpm
  • Setting: 2500 psi
  • Approach Angle: 16 deg | Maximum Engine Operating Angle: 35 deg
  • With 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft | With 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | With 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | With 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | With 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 41 ft | With 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 35.8 ft | With 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 38.3 ft | With 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 40.8 ft
  • Range: 135 " (342.9 cm)
  • Ranges: 116 " - 122 " (294.6 cm - 309.9 cm)
  • 176 in
  • Pad Ranges: 24 " or 30 " (61 cm or 76.2 cm)
  • Tank: 200 gal
  • Tank: 152 gal
  • Range: 87,000 lbs - 124,000 lbs (39,463 kg - 56,245 kg)
  • Control System: TEC Plus
  • Drive: Dual path hydrostatic with planetary transmission | Pad: Single or double grouser | Size: D7G
  • Vermeer HyPower 68 or Vermeer HyPower 100