2025 Vermeer® Surface Miners T1055III
- Year 2025
- Make Vermeer®
- Model Surface Miners
- Engine C13 ACERT
2025 Vermeer® Surface Miners T1055III
2025 Vermeer® Surface Miners T1055III
T1055III highlights- Ideal for large rock excavation applications including surface mining, overburden removal, site preparation and road demolition
- Equipped with a Caterpillar® C13 ACERT Tier 3 or Tier 4 Final electronic engine, giving you the power needed to level surfaces on your construction or mining site
- Pair this with a top-down cutting system to achieve greater rock penetration
Features may include:
Advanced technology for improved machine efficiency- SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
- A rotary power trencher drive motor and splined headshaft produce a low speed and high torque which provide maximum ground penetration and low chain wear for optimal production results.
- The elevating rollover protective module cab features LEXAN glass, filtered and pressurized air, heating and air-conditioning. The cab’s vantage point allows an optimal view of the boom, trench and conveyor.
Engine
Engine Manufacturer
Caterpillar
Engine
C13 ACERT
Emissions
Tier 3 / Tier 4 Final
Engine Power
Gross: 415 hp
Rated Engine Speed
2100 RPM
Cylinder Liners
6
Air Cleaner
Tier 3: Dry-type exhaust aspirated / Tier 4 Final: Dry-type with pre-cleaner
Aspiration
Turbocharged and air-to-air aftercooled
Cooling
Medium: Liquid
Oil Filter
Full flow
Fuel System
Fuel Usage, 100% Load
Tier 3: 20.9 gph / Tier 4 Final: 21.3 gph
Brakes
Parking Brake
Parking and Emergency Brake: Spring applied, hydraulic release, wet disc brake
Brake System Type
Service: Hydrostatic
Electric
Electrical
System: 24 Volt DC
Operational
Operating Conditions
Range: Tier 3 - 9.58 hours / Tier 4 Final - 9.39 hours
Operating Speed
Maximum Ground - Low: 57.1 ft/min / High: 114 ft/min | Conveyor Belt Range:
Ground Pressure
Minimum: 9.4 psi | Maximum: 13.9 psi
Hydraulics
Pump Type
Pressure and flow compensated (load sensing)
Hydraulic Pump
Flow at Maximum RPM: 27.9 gpm
Maximum Pressure
Setting: 2500 psi
Dimensions
Dimensions
Approach Angle: 16 deg | Maximum Engine Operating Angle: 35 deg
Length
With 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft | With 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | With 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | With 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | With 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 41 ft | With 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 35.8 ft | With 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 38.3 ft | With 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 40.8 ft
Height
Range: 135 " (342.9 cm)
Width
Ranges: 116 " - 122 " (294.6 cm - 309.9 cm)
Track Length
176 in
Track Width
Pad Ranges: 24 " or 30 " (61 cm or 76.2 cm)
Capacities
Fuel Capacity
Tank: 200 gal
Oil capacity
Tank: 152 gal
Weights
Weight
Range: 87,000 lbs - 124,000 lbs (39,463 kg - 56,245 kg)
Features
Features
Control System: TEC Plus
Track Type
Drive: Dual path hydrostatic with planetary transmission | Pad: Single or double grouser | Size: D7G
Oil Type
Vermeer HyPower 68 or Vermeer HyPower 100