2025 Vermeer® D10x15 S3 HDD Tier 4i
- Year 2025
- Make Vermeer®
- Model D10x15 S3 HDD
- Engine TD2.9
2025 Vermeer® D10x15 S3 HDD Tier 4i
D10x15 S3 highlights- Reliable, economical solution for small service installation
- Increase crew's productivity
- Put more product in the ground in a short amount of time
Features may include:
Improved rotation performance- Improved rotation performance helps boost productivity — an increase in spindle speed of up to 16% over its predecessor allows for a better mud slurry, enabling better mud flow while pulling in product in softer or reactive ground conditions.
- An almost 50% increase in tractive-effort-to-weight ratio over its predecessor enables improved tracking up and down ditches and enhanced maneuverability when fine-tuning setup and trailer positioning.
- Reduced noise levels at operator’s ear makes a quieter working environment possible — creating less neighborhood disturbance and enabling efficient communication among the crew.
- VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real-time data to make smarter decisions, and help maximize productivity and profitability.
Engine
Engine Manufacturer
Deutz
Engine
TD2.9
Engine Power
Gross: 60 hp
Rated Engine Speed
Maximum: 2300 rpm
Aspiration
Turbocharged
Emissions
Rating: Tier 4i (EU Stage IIIA)
Engine Torque, Maximum
Maximum Spindle (High at Maximum Engine RPM): 1500 ft-lb
Fuel System
Fuel Type
Low sulfur diesel
Operational
Operating Conditions
Thrust: 10000 lbs | Pullback: 10000 lbs
Operating Speed
Maximum Carriage Speed at Maximum Engine RPM: 208 ft/min | Maximum Spindle Speed at Max Engine RPM: 240 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 3.3 mph
Performance
Noise Level
At Operator's Ear: 86 dB(A) | Guaranteed sound power (CE-rating): 103 dB(A)
Hydraulics
Hydraulic Type
Supply Filter Rating: 5 micron | Return Filter Rating: 5 micron
Hydraulic Pump
Auxiliary Flow at Maximum Engine RPM: 9 gpm | Thrust/Pullback Flow at Max Engine RPM: 29 gpm | Rotation Pump Flow at Maximum Engine RPM: 29 gpm
Hydraulic Flow
Drilling: 20 gpm
Maximum Pressure
Auxiliary Pump Relief Pressure: 3000 psi | Thrust/Pullback Pump Relief Pressure: 4350 psi | Rotation Pump Relief Pressure: 4350 psi | Drilling: 750 psi
Dimensions
Dimensions
Angle of Approach: 22 deg | Rod Diameter: 1.66 in (4.3 cm) | Joint Inside Diameter: .8 in | Minimum Bend Radius: 95.5 ft
Transport Length
Minimum: 153 in
Transport Width
Minimum: 44 in
Transport Height
Minimum: 66 in
Length
Drill: 6 ft
Bore
Minimum Diameter: 2.5 in
Capacities
Fuel Capacity
Tank: 18 gal
Hydraulic Capacity
System: 25 gal
Features
On Board Tank Capacity: 25 gal
Weights
Weight
7750 lbs | Drill: 26 lbs
Features
Features
Breakout System: Standard hyd vise | Drill Rod Thread: 1.66 Firestick® drill rod #200 | Thread Type: Firestick (#200)