2024 Vermeer® Utility Directional Drills D10x15

Information

2024 Vermeer® Utility Directional Drills D10x15

Power and performance

The D10x15 S3 Navigator® horizontal directional drill is a reliable, economical solution for small service installation — built to help increase your crew’s productivity so you can go from one job to the next faster. With significant gains in horsepower and speed and a reduction in noise, the D10x15 S3 can help you put more product in the ground in a shorter amount of time.

Features may include:

More length per day
  • An increase in carriage speed of almost 11% over its predecessor allows for faster cycle times and improved jobsite productivity.
Improved rotation performance
  • Improved rotation performance helps boost productivity — an increase in spindle speed of up to 16% over its predecessor allows for a better mud slurry, enabling better mud flow while pulling in product in softer or reactive ground conditions.
High rotational torque rating
  • A high rotational torque rating of 1500 ft-lb (2033.7 Nm) and 10,000 lb (44.5 kN) of thrust/pullback force provide the versatile power required for tough ground conditions and pulling reamers.
Compact but powerful
  • An almost 50% increase in tractive-effort-to-weight ratio over its predecessor enables improved tracking up and down ditches and enhanced maneuverability when fine-tuning setup and trailer positioning.
Reduced noise levels
  • Reduced noise levels at operator’s ear makes a quieter working environment possible — creating less neighborhood disturbance and enabling easier communication among the crew.
Small footprint
  • Small footprint — 4 in (10.2 cm) narrower than its closest competitor — allows the drill to easily maneuver within narrow jobsites and position side by side with a mix system on a trailer.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Utility Directional Drills D10x15
  • TD2.9
  • Low sulfur diesel
  • Available

Specifications

  • 2024
  • Vermeer®
  • Utility Directional Drills
  • D10x15
  • Directional
  • TD2.9
  • Rating: Tier 4i (EU Stage IIIA)
  • Maximum: 2300 rpm
  • Gross Horsepower: 44.7 kw
  • Turbocharged
  • Deutz
  • Spindle (High at Maximum Engine RPM): 2033.7 Nm
  • Low sulfur diesel
  • Pullback: 44.5 kN | Thrust: 44.5 kN
  • Maximum Carriage Speed at Maximum Engine RPM: 63.4 m/min | Maximum Ground Drive Speed at Maximum Engine RPM: 5.3 km/h | Maximum Spindle Speed at Max Engine RPM: 240 rpm
  • At Operator's Ear: 86 dB(A) | Guaranteed sound power (CE-rating): 103 dB(A)
  • Auxiliary Flow at Maximum Engine RPM: 9 gpm | Rotation Pump Flow at Maximum Engine RPM: 109.8 L/min | Thrust/Pullback Flow at Max Engine RPM: 29 gpm (109.8 L/min)
  • Auxiliary Pump Relief: 3000 psi (206.8 bar) | Rotation Pump Relief: 299.9 bar | Thrust/Pullback Relief Pressure: 4350 psi (299.9 bar)
  • Hydraulic Return Filter Rating: 5 micron | Hydraulic Supply Filter Rating: 5 micron
  • Angle of Approach: 22 deg | Minimum Bend Radius: 29.1 m | Joint Inside Diameter: 2 cm | Rod Diameter: 1.66 in (4.3 cm)
  • Minimum: 167.6 cm
  • Minimum: 111.8 cm
  • Minimum: 388.6 cm
  • 1.8 m
  • Minimum Diameter: 6.4 cm
  • Tanck: 68.1 L
  • System: 94.6 L
  • 3515.3 kg | Drill: 11.8 kg
  • Thread Type: Firestick (#200) | Drill Rod Thread: 1.66 Firestick® drill rod #200