2025 Vermeer® T655III Pipeline Trencher Tier 3

Information

2025 Vermeer® T655III Pipeline Trencher Tier 3

T655III highlights
  • Low-speed, high-torque splined headshaft motor improves cutting performance and minimizes chain wear
  • Vermeer SmartTEC electronic control system monitors real-time machine performance
  • The Tier 3 or Tier 4 Final John Deere® 6090 HF diesel engine provides the power to dig up to 8 ft (2.4 m) deep

Features may include:

Advanced technology for improved machine efficiency
  • SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Elevated operator visibility and comfort
  • It is also a rollover protective module (ROPM) and provides falling object protection (FOPS).
Continued performance on hills and slopes
  • An oscillating track frame allows the track to follow the ground’s contour, providing a vertical trench on slopes up to 10.5°.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • T655III Pipeline Trencher Tier 3
  • 6090HF
  • Available
  • Ranges: 97" (246.4 cm) | Belt: 24 in
  • Range: 119" (302.3 cm) | Discharge Range: 48" and 56" (121.9 and 142.2 cm)

Specifications

  • 2025
  • Vermeer®
  • T655III Pipeline Trencher
  • Tier 3
  • Ditchers
  • 6090HF
  • John Deere
  • Tier 3
  • Gross: 250 hp
  • 2200 RPM
  • 6
  • Dry-type with pre-cleaner
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full flow
  • 12.3 gph
  • Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Range: 11 hours
  • Maximum Ground - Low: 114 ft/min / High: 227 ft/min | Conveyor Belt Range: 0-758 fpm (231 m/min)
  • Minimum: 7.8 psi | Maximum: 9.7 psi
  • Pressure-and-flow-compensated (load-sensing)
  • Flow at Maximum RPM: 25 gpm
  • Setting: 2500 psi
  • Approach Angle: 16 deg | Maximum Engine Operating Angle: 30 deg | Tilt Track Max Angle: 10.5 degrees | Conveyor Shift Distance Range: 12" and 48" (30.5 cm and 121.9 cm)
  • With 20" (50.8 cm) End Idler and 4 ft (1.22 m) Boom: 25.6 ft | With 20" (50.8 cm) End Idler and 6 ft (1.83 m) Boom: 27.8 ft | With 20" (50.8 cm) End Idler and 8 ft (2.44 m) Boom: 30.1 ft | With 40" (101.6 cm) End Idler and 4 ft (1.22 m) Boom: 23.6 ft | With 40" (101.6 cm) End Idler and 5 ft (1.52 m) Boom: 25.3 ft | With 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 26.3 ft | With 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 28.5 ft | Conveyor: 96" and 144" (243.8 cm and 365.8 cm)
  • Range: 119" (302.3 cm) | Discharge Range: 48" and 56" (121.9 and 142.2 cm)
  • Ranges: 97" (246.4 cm) | Belt: 24 in
  • 136.5 in
  • Pad Ranges: 20" (50.8 cm)
  • Tank: 135 gal
  • Tank: 85 gal
  • Range: 40,000 lb - 59,500 lb (18,143.7 kg - 26988.7 kg)
  • Control System: TEC Plus with SmartTEC
  • Drive: Dual path hydrostatic with planetary transmission | Pad: Single, double or triple grouser | Size: D4
  • Conveyor Belt Style: Cleated
  • Style: Flat or curved
  • Direction: Right or left
  • Vermeer HyPower 68 or Vermeer HyPower 100