2025 Vermeer® T1155III Pipeline Trencher Tier 3

Information

2025 Vermeer® T1155III Pipeline Trencher Tier 3

T1155III highlights
  • Vermeer SmartTEC electronic control system monitors real-time machine performance
  • When you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through

Features may include:

Cut a deeper trench with a sectionalized boom
  • Complimentary to the sectionalized booms, the crumber can be adjusted to accommodate a variety of digging depths.
Advanced technology for improved machine efficiency
  • SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Elevated operator visibility and comfort
  • The sealed cab has self-contained heating and air conditioning with sound attenuating foam.
  • The elevating cab allows optimal visibility and added comfort with the air ride seat.
  • It is also a rollover protective module (ROPM) and provides falling object protection (FOPS).

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • T1155III Pipeline Trencher Tier 3
  • C15 ACERT
  • Available
  • Ranges: 118"-120" (292.1 cm - 304.8 cm) | Belt: 30 in
  • Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)

Specifications

  • 2025
  • Vermeer®
  • T1155III Pipeline Trencher
  • Tier 3
  • Ditchers
  • C15 ACERT
  • Caterpillar
  • Tier 3
  • Gross: 540 hp
  • 2100 RPM
  • 6
  • Dry-type with precleaner
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full flow
  • 28.9 gph
  • Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Range: 9.4
  • Maximum Ground - Low: 50 ft/min / High: 133 ft/min | Conveyor Belt Range: 0-1070 fpm
  • Minimum: 13 psi | Maximum: 17.3 psi
  • Pressure-and-flow-compensated (load-sensing)
  • Flow at Maximum RPM: 27.9 gpm
  • Setting: 2500 psi
  • Approach Angle: 16 deg | Maximum Engine Operating Angle: 35 deg | Conveyor Shift Distance Range: 65" and 125" (165.1 cm and 317.5 cm)
  • With 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 37.3 ft | With 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 39.8 ft | With 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 42.3 ft | With 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 43 ft | With 50" (127 cm) End Idler and 16 ft (4.88 m) Boom (with Restraint Bar): 45.3 ft | Conveyor: 168" or 228" (426.7 or 579.1 cm)
  • Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)
  • Ranges: 118"-120" (292.1 cm - 304.8 cm) | Belt: 30 in
  • 177.5 in
  • Pad Ranges: 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm)
  • Tank: 270 gal
  • Tank: 152 gal
  • Range: 120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
  • Control System: TEC Plus with SmartTEC
  • Drive: Dual path hydrostatic with planetary transmission | Pad: Single, double or triple grouser | Size: CAT 350 Excavator
  • Conveyor Belt Style: Cleated or finger type
  • Style: Curved
  • Direction: Right or left
  • Vermeer HyPower 68 or Vermeer HyPower 100