2025 Vermeer® T1055III Pipeline Trencher Tier 3
- Year 2025
- Make Vermeer®
- Model T1055III Pipeline Trencher
- Engine C13 ACERT
2025 Vermeer® T1055III Pipeline Trencher Tier 3
2025 Vermeer® T1055III Pipeline Trencher Tier 3
T1055III highlights- For trenching projects requiring high horsepower and deep digging depths, Vermeer offers the T1055 trencher
- When you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through
Features may include:
Maximum ground penetration and low chain wear- Perform rock excavation effectively with minimal chain wear due to its low-speed, high-torque, splined headshaft motor.
- SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
- Complimentary to the sectionalized booms, the crumber can be adjusted to accommodate a variety of digging depths.
- The elevating cab allows optimal visibility and added comfort with the air ride seat.
- The sealed cab has self-contained heating and air conditioning with sound attenuating foam.
- It is also a rollover protective module (ROPM) and provides falling object protection (FOPS).
Engine
Engine Manufacturer
Caterpillar
Engine
C13 ACERT
Emissions
Tier 3
Engine Power
Gross: 415 hp
Rated Engine Speed
2100 RPM
Cylinder Liners
6
Air Cleaner
Dry-type exhaust aspirated
Aspiration
Turbocharged and air-to-air aftercooled
Cooling
Medium: Liquid
Oil Filter
Full flow
Fuel System
Fuel Usage, 100% Load
20.9 gph
Brakes
Parking Brake
Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake
Brake System Type
Service: Hydrostatic
Electric
Electrical
System: 24 Volt DC
Operational
Operating Conditions
Range: 8.8 hours
Operating Speed
Maximum Ground - Low: 57.1 ft/min / High: 114 ft/min | Conveyor Belt Range: 0-1070 fpm (0-326 m/min)
Ground Pressure
Minimum: 9.4 psi | Maximum: 13.9 psi
Hydraulics
Pump Type
Pressure-and-flow-compensated (load-sensing)
Hydraulic Pump
Flow at Maximum RPM: 27.9 gpm
Maximum Pressure
Setting: 2500 psi
Dimensions
Dimensions
Approach Angle: 16 deg | Maximum Engine Operating Angle: 35 deg | Conveyor Shift Distance Range: 5" and 65" (12.7 and 165.1 cm)
Length
With 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft | With 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | With 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | With 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | With 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 41 ft | With 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 35.8 ft | With 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 38.3 ft | With 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 40.8 ft | Conveyor: 108" or 168" (274.3 cm or 426.7 cm)
Height
Range: 135" (342.9 cm) | Discharge Range: 64"-78" (162.6 cm - 198.1 cm)
Width
Ranges: 116"-122" (294.6 cm - 309.9 cm) | Belt: 30 in
Track Length
176 in
Track Width
Pad Ranges: 24" (61 cm) or 30" (76.2 cm)
Capacities
Fuel Capacity
Tank: 184 gal
Oil capacity
Tank: 152 gal
Weights
Weight
Range: 87,000 lb - 124,000 lb (39,463.5 kg - 56,245.5 kg)
Features
Features
Control System: TEC Plus with SmartTEC
Track Type
Drive: Dual path hydrostatic with planetary transmission | Pad: Single or double grouser | Size: D7G
Belt Type
Conveyor Belt Style: Cleat or finger type
Conveyor Type
Style: Curved
Discharge Type
Direction: Right or left
Oil Type
Vermeer HyPower 68 or Vermeer HyPower 100