2024 Vermeer® Pipeline Directional Drills D330x500

Information

2024 Vermeer® Pipeline Directional Drills D330x500

Ability to travel to job sites at any time of day.

Sized within legal dimensions in transport mode, the D330x500 travels to job sites at any time of day. Once there, you’ll set up fast because of its self-contained design. The 486 hp/363 kW Caterpillar C-15 Tier 3 diesel engine gives you a ground-penetrating 50,000 ft-lb./67,800 Nm of rotational torque and 330,000 lbs/1,468 kN of thrust/pullback.

Features may include:

Climate-controlled, two-person cab
  • Improves productivity through a climate-controlled two-person cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
Increased efficiency
  • Increases manpower efficiency, because drilling controls, fluid controls, transport and crane can all be controlled from a single person in the cab.
Higher torque
  • Muscles through difficult ground formations with higher torque than other models.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Pipeline Directional Drills D330x500
  • Available
  • with cab: 340.4 cm

Specifications

  • 2024
  • Vermeer®
  • Pipeline Directional Drills
  • D330x500
  • Directional
  • Caterpillar
  • C-15
  • Tier 4 Final (EU Stage V)
  • Gross: 402.7 kw
  • 2100 rpm | Maximum Spindle Speed (Low at Maximum Engine RPM): 36 rpm | Maximum Spindle Speed (Medium at Maximum Engine RPM): 53 rpm | Maximum Spindle Speed at Max Engine RPM: 88 rpm
  • Liquid
  • Turbocharged
  • Maximum Spindle Torque (Low at Maximum Engine RPM): 67791 Nm | Maximum Spindle Torque (Medium at Maximum Engine RPM): 50843.3 Nm | Maximum Spindle Torque (High at Maximum Engine RPM): 33895.5 Nm
  • Diesel| Fuel consumption: 109.5 lph
  • Thrust: 1512.4 kN | Pullback: 1512.4 kN
  • Maximum Carriage Speed at Maximum Engine RPM: 17.1 m/min | Maximum Carriage Speed in Low at Maximum Engine RPM: 12.8 m/min | Maximum Ground Drive Speed at Maximum Engine RPM: 4.8 km/h
  • Auxiliary Pump at Maximum Engine RPM: 32 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 530 L/min | Rotation Pump Flow at Maximum Engine RPM: 530 L/min
  • Auxiliary Pump Relief: 206.8 bar | Thrust/Pullback Pump Relief: 413.7 bar | Rotation Pump Relief: 399.9 bar
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 30 deg | Maximum Operating Angle (Left/Right): 30 deg | Minimum Bore Diameter: 16.5 cm | Rotation: 360 deg | Maximum Reach: 762 cm | Drill Rack Angle: 13-18 deg
  • Min: 1625.6 cm | Min 20 ft (6.1 m); 1109.5 cm
  • With cab: 254 cm
  • with cab: 340.4 cm
  • Tank: 794.9 L
  • Tank: 757.1 L | System: 1022.1 L
  • 6350.3 kg | Boom Extended/Max Reach: 1179.3 kg
  • 40823.3 kg
  • Hydraulic Supply Filter Rating: 200 | Hydraulic Return Filter Rating: 6