2024 Vermeer® Pipeline Directional Drills D1320x900

Information

2024 Vermeer® Pipeline Directional Drills D1320x900

Maximize your drilling muscle with the field-tested D1320x900 Navigator® horizontal directional drill.

Loaded with feature after feature to improve performance, reliability and durability, the D1320x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 102,500 ft-lb (138,971.6 Nm) of rotational torque and 1,360,000 lb (616,885.7 kN) of thrust/pullback.

Features may include:

High-torque, low-speed Hagglunds hydraulic motors
  • Operates efficiently with high-torque, low-speed Hagglunds hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
Thrust box bearing-pack assembly
  • Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
Floating vise
  • Helps prevent rod wrap or windup because its floating vise allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
Higher torque
  • Muscles through difficult ground formations with higher torque than other models.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Pipeline Directional Drills D1320x900
  • Available
  • 2.6 m | Driller: 2.6 m | Front Base Anchor: 1.8 | Front Flat Anchor: 1.5 m | Rear Base Anchor: 2.4 m | Powerpack: 2.4 m
  • 2.7 m | Front Base Anchor: 61 cm | Front Flat Anchor: 20.3 cm | Rear Base Anchor: 20.3 cm | Powerpack: 3.1 m

Specifications

  • 2024
  • Vermeer®
  • Pipeline Directional Drills
  • D1320x900
  • Directional
  • CAT
  • C-27
  • Tier 2 (EU Stage II)
  • Gross: 596.6 kw
  • Max: 2000 rpm | Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm | Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
  • Maximum Spindle Torque (Low at Maximum Engine RPM): 135582 Nm | Maximum Spindle Torque (Medium at Maximum Engine RPM): 50843.3 Nm | Maximum Spindle Torque (High at Maximum Engine RPM): 51521.2 Nm
  • 18.1 L
  • Liquid
  • Turbocharged aftercooled
  • Diesel | Fuel consumption: 112.4 lph
  • Triple axle with air ride suspension
  • Thrust: 6049.6 kN | Pullback: 6049.6 kN | Maximum Spindle Torque: 138971.6 Nm | Maximum Spindle Torque (Low at Maximum Engine RPM): 138971.6 Nm | Breakout Force: 343022.5 Nm | Clamp Force: 338955 Nm
  • Maximum Carriage Speed at Maximum Engine RPM: 19.5 m/min
  • Drill Rack Angle: 8 degrees to 12 degrees | Mud Swivel: 7.6 cm | Configuration: 3-jaw clamp, 8 " (20.3 cm) | Travel: 1.8 m | Inside Diameter: 24.9 cm / 25.4 cm
  • Min: 15.4 m
  • Min: 3.5 m
  • 3.1 m | Front Base Anchor: 6.1 m | Front Flat Anchor: 2.9 m | Rear Base Anchor: 4.9 m | Powerpack: 6.8 m
  • 2.6 m | Driller: 2.6 m | Front Base Anchor: 1.8 | Front Flat Anchor: 1.5 m | Rear Base Anchor: 2.4 m | Powerpack: 2.4 m
  • 2.7 m | Front Base Anchor: 61 cm | Front Flat Anchor: 20.3 cm | Rear Base Anchor: 20.3 cm | Powerpack: 3.1 m
  • Tank: 1892.7 L
  • Tank: 2725.5 L
  • 45812.8 kg | Driller: 2721.6 kg | Powerpack: 17236.5 kg | Lower breakout vise: 1723.7 kg
  • Number of Rear Legs: 2 | Heat and Air Conditioning: In-wall combination unit | Number of Rotation Motors: 1 | Number of Drive Motors: 6 | Configuration: 2-jaw clamp