2025 Vermeer® Pipeline Directional Drills D100x140 S3

Information

2025 Vermeer® Pipeline Directional Drills D100x140 S3

D100X140 S3 highlights
  • Maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm.
  • Select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm)
  • Firestick® drill rod Dual displays for simpler operator use

Features may include:

More work, fewer hassles
  • Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers operator visibility during rod makeup/breakout.
  • Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.
  • True open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.
Impressive power at your fingertips
  • Dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.
  • Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.
  • The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5 ft (6 m), the crane has a rated capacity of 3,970 lb (1,800.8 kg).
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real-time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Pipeline Directional Drills D100x140 S3
  • Ultra low sulfur diesel
  • Available
  • With Cab: 138 in

Specifications

  • 2025
  • Vermeer®
  • Pipeline Directional Drills
  • D100x140 S3
  • Directional
  • CAT
  • Gross: 275 hp
  • Maximum: 2200 rpm
  • Twin turbocharged
  • Maximum Spindle (Low at Maximum Engine RPM): 14000 ft-lb | Maximum Spindle (Medium at Maximum Engine RPM): 10500 ft-lb | Maximum Spindle (High at Maximum Engine RPM): 7000 ft-lb
  • Max Fuel Consumption: 15 gph
  • Ultra low sulfur diesel
  • Thrust: 100000 lbs | Pullback: 100000 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min | Maximum Spindle Speed at Max Engine RPM: 215 rpm
  • At Operator's Ear - 15 ft (4.6 m): 82 dB(a) | At Operator's Ear - 20 ft (6.1 m): 84 dB(a)
  • Drilling: 230 gpm
  • Drilling: 1000 psi
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 25 | Maximum Operating Angle (Left/Right): 25 | Maximum Ground Drive Speed at Maximum Engine RPM: 2.8 mph | Drill Rack Angle: 24 deg | Rotation: 360 deg | Maximum Reach: 234 in
  • Minimum - 15 ft (4.6 m): 376.8 in / 20 ft (6.1 m): 436.8 in
  • Minimum: 102 in | With Cab, Minimum: 102 in
  • Minimum: 138 in
  • With Cab: 138 in
  • Minimum Diameter: 6 in
  • Tank: 115 gal
  • Tank: 80 gal | System: 120 gal
  • Maximum: 5070 lbs | Maximum - Boom Extended/Max Reach: 3970 lbs
  • 15 ft (6.1 m): 50300 lbs | 20 ft (6.1 m): 52500 lbs | Cab - 15 ft (4.6 m): 49800 lbs | Cab - 20 ft (6.1 m): 57220 lbs
  • Automated Rod Loader: Semi-automated