2025 Vermeer® Horizontal Grinders HG6000TX

Information

2025 Vermeer® Horizontal Grinders HG6000TX

HG6000TX highlights
  • Productivity meets jobsite mobility
  • Robust build quality for confident longevity
  • Maintenance-friendly design optimizes serviceability
  • Equipped with Vermeer innovations to help protect your investment and optimize efficiency

Features may include:

Productive and powerful
  • The Series III duplex drum is built off the proven cutting performance of previous Vermeer duplex drum designs and makes maintenance more convenient with enhancements such as an independently secured wedge system and enhanced drum balancing.
  • Maximize feeding capability with machine sidewalls that provide optimal flow of material and minimize operator interaction.
  • The feed roller planetary is fully enclosed for protection from debris and offers a tighter clearance between the feed roller and mill housing, helping reduce material blockage and drag on the feed roller circuit.
  • The track-driven grinder offers onsite mobility with a remote control for easy maneuverability.
Intelligent operation
  • Maximize productivity thanks to the exclusive Vermeer SmartGrind system, which automatically controls grinding speed based on engine rpm levels.
  • Machine damage caused by metal contaminants entering the hammermill can be costly. The Vermeer Damage Defense system helps protect your machine by detecting certain metal contaminants.
  • An industry-leading, full-function, wireless remote control lets you adjust machine settings from the cab as conditions change, including control of the infeed settings, engine droop, conveyor height and more.
Ease of maintenance
  • Top-loading screens are designed to give operators easy access.
Safety
  • Reduce the quantity and distance of thrown material debris with the Thrown Object Deflector (TOD), strategically placed to reduce interference when loading over-length material.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Horizontal Grinders HG6000TX
  • C18
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Feed opening: 56.4-in (143.3-cm) | Millbox Opening: 60" (152.4 cm) | Liner Dimensions: 5.6" (14.2 cm) | 48 in
  • Feed opening: 32-in (81.3-cm) | Millbox Opening: 32" (81.3 cm) | Load: 14 ft

Specifications

  • 2025
  • Vermeer®
  • Horizontal Grinders
  • HG6000TX
  • Horizontal
  • C18
  • Caterpillar
  • Tier 4F (Stage IVB)
  • 6
  • 755 hp
  • 2582 ft-lb
  • Dry-type with primary and secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid
  • Max Consumption: 38.3 gph
  • Ultra-low sulfur diesel (<15 ppm)
  • Hydraulic-operated wet clutch with PTO | Engagement: Push-button
  • Motor: Fixed displacement, geroler
  • Air-ride
  • Air-actuated with spring-applied parking brake | Track Type: Multidisk parking brake (spring activated)
  • Group 8-D, 1155 CCA (Qty 2) | System Protection: Fused | AA (qty 6)
  • 24 Volt
  • Drum: 1086 rpm | Drum: 683 rpm | Belt: 780 ft/min | Maximum: 2.6 mph | Low Travel in Creep Mode: 1 mph
  • 119.8 dB(A) - deluxe exhaust system
  • System: Open-loop, pressure- and flow-compensated | System: Open-loop
  • Variable displacement, axial piston | Fixed displacement, gear pump | Track Drive Type: SauerDanfoss Series H1
  • At Maximum RPM: 32.4 / 25.7 gpm / 36.2 gpm / 12.4 gpm / 43 gpm
  • System Relief: 4500 psi / 3000 / 260 psi / 5000 psi | Track Width Option One - Ground Bearing Pressure - Hard Ground: 55.6 psi / Soft Ground: 10.2 psi / Option: 13.2 psi
  • Fifth wheel
  • Trailer Type: 12-24 V LED
  • Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) | Millbox Opening: 60 | Drum Diameter: 34.3 in | Knife Thickness: .625 in (1.6 cm) | Shaft diameter: 6.5 in | Screen Dimensions: 3/4" (1.9 cm) thick | Liner Dimensions: 1" thick (2.5 cm thick) | Anvil Dimensions: 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) | Idler Roller Diameter: 12 in | Idler Roller Bearing: 1-15/16, 4-bolt flange | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Drive Motor Bearings: 1-15/16, 4-bolt flange | Operating Range: Up to 300' (91.4 m) | Screen Area: 3317 sq in
  • Maximum: 37.3 ft | with Dolly: 45.8 ft
  • Maximum with Dolly: 9.8 ft
  • Maximum with Dolly: 154.8 in
  • Maximum (Operation): 54.5 ft | Liner Dimensions: 65.4" (166.1 cm) | 81.3 ft | Track on Ground: 142" (360.7 cm)
  • Feed opening: 32-in (81.3-cm) | Millbox Opening: 32" (81.3 cm) | Load: 14 ft
  • Feed opening: 56.4-in (143.3-cm) | Millbox Opening: 60" (152.4 cm) | Liner Dimensions: 5.6" (14.2 cm) | 48 in
  • Drum: 62.4 in | Drum: 63 in
  • Cut Adjustable: .125 in (.31 cm) to 1 in (2.5 cm)
  • Tank: 350 gal
  • Volume with Filter: 36 qt
  • Tank: 100 gal
  • Coolant Capacity (Engine and Radiator): 22.6 gal
  • Fan: (Qty 2) Hydraulically driven, reversible | Fan - CAC: Hydraulic (variable speed) | Deflector: Position Variable | Number of Hammers: 10 | Number of Tips: 20 | Tip types: Premium wide | Useable Edges: 1 | Number of Pockets: 14 | Shaft Retention Type: Keyless bushing | Screen Type: Fabricated out of abrasion resistant steel | Number of Screens: 2 | Number of Sides: 1 | Anvil Type: Fabricated steel with replaceable wear surfaces | Return Roller Quantity: 4 | Filtration Method: Dual in-tank return filters with suction strainer | Number of Coolers: 2 (Implement/Track) | Fan Series - FWD/REV: Reversible | Filtration Method: Spin-on, pressure filter, B6 = 1000 | Number of Coolers: 1 | Display Type: LCD | Gauges: Two, fuel level and hydraulic pressure | Switches: Moisture-proof, toggle style / Sealed membrane | Radio remote type: R524 | Channel Setting: 50 channels | Number of Axles: 3 | Track Type: D5 double grouser | Type of Idler: D5 excavator rollers | Number of Idlers: 20
  • 75000 lbs | Tongue - with Dolly: 37590 lbs | Axle - with Dolly: 48910 lbs | Dolly: 9500 lbs | Infeed roller with arm: 3350 lbs | Drum: 4741 lbs / 5946 lbs | Screen: 470 lbs
  • Recommended: API CJ-4, 15W-40 | Recommended: Vermeer HyPower 68 | Recommended: VMF Gold
  • Drive: Synchronous, carbon fiber | Design: 3 ply - 330# or straight warp single ply 330# both with V cleat
  • Double row, spherical roller | Spherical
  • 28 | Bolts/Knife: 2
  • Chipper Drum: A8 mod chipper steel | Millbox lid liner: Abrasion-resistant steel | Millbox Lid Liner Dimensions: Abrasion resistant steel | Splice: R2-stainless steel or Super splice