2025 Vermeer® Horizontal Grinders HG6000

Information

2025 Vermeer® Horizontal Grinders HG6000

HG6000 highlights
  • Bring more versatility to your wood waste processing operation
  • Maintenance-friendly design optimizes serviceability
  • Equipped with Vermeer innovations to help protect your investment and optimize efficiency

Features may include:

Productive and powerful
  • Maximize loading speed and productivity using the patented SmartGrind system and hydraulic feed roller down pressure. Open-ended, wide infeed tables are designed to make over-the-side loading easy and efficient.
  • The Series III duplex drum is built off the proven cutting performance of previous Vermeer duplex drum designs and makes maintenance more convenient with enhancements such as an independently secured wedge system and enhanced drum balancing.
  • A 60-in (152.4-cm) wide infeed table with flared sidewalls can accommodate a large volume of material.
Intelligent operation
  • The intelligent feed system monitors the machine's engine speed, and holds the engine at an optimal level. This allows you to spend more time feeding and less time adjusting settings.
  • Machine damage caused by metal contaminants entering the hammermill can be costly. The Vermeer Damage Defense system helps protect your machine by detecting certain metal contaminants.
  • An industry-leading, full-function, wireless remote control lets you adjust machine settings from the cab as conditions change, including control of the infeed settings, engine droop, conveyor height and more.
Ease of maintenance
  • The feed roller planetary is fully enclosed for protection from debris and offers a tighter clearance between the feed roller and mill housing, helping reduce material blockage and drag on the feed roller circuit.
Safety
  • Reduce the quantity and distance of thrown material debris with the Thrown Object Deflector (TOD), strategically placed to reduce interference when loading over-length material.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Horizontal Grinders HG6000
  • C18
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Feed Table: 60 in | Infeed Roller: 56.4 in | Millbox Opening: 60" | single belt: 48 in
  • Maximum Feed: 32 in | Millbox Opening: 32" | Load: 14 ft

Specifications

  • 2025
  • Vermeer®
  • Horizontal Grinders
  • HG6000
  • Horizontal
  • C18
  • Caterpillar
  • Tier 4F (Stage V)
  • 2582 ft-lb
  • 6
  • Gross (Maximum): 755 hp
  • Dry-type with primary and secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid (nitrite-free, pre-diluted 50/50)
  • Max Fuel Consumption: 37.9 gph
  • Ultra-low sulfur diesel (<15 ppm)
  • Type: Leaf spring suspension
  • Hydraulic-operated wet clutch, PT Tech | Engagement: Push-button
  • Radial piston motor | Drive Motor: Fixed displacement, Geroler | Planetary: Two options (HD - 26.18:1) (STD - 34.2:1)
  • Air-actuated with spring-applied parking brake
  • Group 8-D, 1155 CCA (Qty 2) | System Protection: Fused | AA (qty 6)
  • 24 V 95 A
  • Drum: 1086 rpm | Belt: 780 ft/min
  • 121 dB(A)
  • Filtration Method: Dual in-tank return filters (B5=200) | system: Open-loop, pressure- and flow-compensated | discharge conveyor system type: Open-loop / fan: Open-loop, pressure- and flow-compensated
  • Variable displacement, axial piston | discharge conveyor: Fixed displacement, gear pump / fan: Variable displacement, axial piston
  • Flow at Maximum RPM: 32.4 / 12.4 gpm | Discharge conveyor Flow at Maximum RPM:: 25.7 gpm / Fan: 36.2 gpm
  • System Relief Pressure: 3000 / 4500 | System relief pressure: 260 psi
  • Fifth wheel
  • Unit body construction
  • Trailer Type: 12-24V LED
  • Feed opening: 32-in (81.3-cm) high x 56.4-in (143.3-cm) wide | Infeed Roller Diameter: 36.1 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) | Knife Thickness: .625 in (1.6 cm) | Shaft diameter: 6.5 in | Screen Dimensions: 3/4" (1.9 cm) thick | Screen Area: 3317 sq in | Liner Dimensions: 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) | Idler Roller Diameter: 12 in | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
  • Maximum: 38.8 ft
  • Maximum: 8.2 ft
  • Maximum: 13.1 ft
  • Feed Table: 60 in | Infeed Roller: 56.4 in | Millbox Opening: 60" | single belt: 48 in
  • Feed Table: 20 ft | Infeed Roller: 47.2 in | single belt: 81.3 ft
  • Maximum Feed: 32 in | Millbox Opening: 32" | Load: 14 ft
  • Adjustable: .125 in (.31 cm) to 1 in (2.5 cm)
  • Drum: 62.4 in
  • 350 gal
  • 100 gal
  • Volume with Filter: 36 qt
  • Coolant Capacity (Engine and Radiator): 28.7 gal
  • Fan: Hydraulically-driven, reversible | Fan - CAC: Hydraulically-driven, reversible | Tooth Design: Serrated bars | Number of Teeth: 13 bars | Feed Roller Down Pressure: Adjustable | Bearing Type: Double row, spherical roller | Number of Hammers: 10 | Number of Tips: 20 | Tip types: Premium wide | Useable Edges: 1 | Number of Pockets: 14 | Shaft Retention Type: Keyless bushing | Number of Screens: 2 | Number of Sides: 1 | Return Roller Quantity: 4 | Idler Roller Bearing: 1-15/16, 4-bolt flange | Number of Coolers: 2 / clutch: 1 | clutch Filtration Method: Spin-on, pressure filter, B6 = 1000 | Display Type: LCD | Gauges: Two, fuel level and hydraulic pressure | Switches: Moisture-proof, toggle style / Sealed membrane | Radio remote type: R424 | Channel: Unit body construction Setting 50 channels | Number of Axles: 3
  • 65000 lbs | Tongue: 21000 lbs | Axle: 44000 lbs | Infeed roller weight with arm: 3350 lbs / 3483 lbs | Drum: 4741 lbs / 5946 lbs
  • Recommended: Oil API CJ-4, ECF-3 or API CK-4 Ultra Low Sulfur / Vermeer HyPower 68 | clutch Recommended: VMF Gold
  • Drive: Synchronous | single: 3 ply - 330# or straight warp single ply 330# both with V cleat
  • Flare: Integrated with infeed | Steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Fabricated steel | chipper drum: A8 mod chipper steel | Screen Type: Fabricated out of abrasion-resistant steel | Millbox lid liner: Abrasion-resistant steel | Millbox Lid Liner Dimensions: Abrasion resistant steel | Anvil Type: Fabricated steel with replaceable wear surfaces | Splice: R2-stainless steel or Super splice
  • Feed: Welded slat chain
  • 28 | Bolts/Knife: 2