2025 Vermeer® Tub Grinders TG7000 - Tier 2

Information

2025 Vermeer® Tub Grinders TG7000 - Tier 2

TG7000 highlights
  • Packed with innovation and power
  • Minimize labor cost on the job
  • Offering proven cutting performance

Features may include:

Safety
  • The patented Thrown Object Restraint System (TORS) reduces the amount and distance of thrown material debris and has a smooth underside for better material flow.
Powerful cutting performance
  • A C27 Tier 4F engine provides 950 hp (708 kW) of power to meet your jobsite demands.
  • The patented Series III duplex drum offers proven cutting performance, and reversible hammers and tips nearly double the wear life of single-sided designs and simplify daily maintenance.
Convenient control
  • Monitor real-time performance and data via the on-machine display or remote control.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Tub Grinders TG7000 - Tier 2
  • C27
  • Ultra low sulfur diesel or low sulfur diesel
  • Available
  • Discharge System: 48 in
  • Maximum - Cab in Operating Position: 18.8 ft | Loading: 11.3 ft | Load: Minimum = 11.9 ft, Maximum = 17 ft at 35 deg

Specifications

  • 2025
  • Vermeer®
  • Tub Grinders
  • TG7000 - Tier 2
  • Tub
  • C27
  • Caterpillar
  • Tier 2/Stage II
  • 12
  • 950 hp
  • 3202 ft-lb
  • Pleated Primary (4) and Secondary (4) with precleaners (2) and electric restriction indicator (2)
  • Spin-on (2)
  • Medium: Liquid
  • Max Fuel Consumption: 45.7 gph
  • Ultra low sulfur diesel or low sulfur diesel
  • Type: Hydraulic Operated Wet Clutch | Engagement: Push Button
  • Closed loop hydraulic, continuous sprocket | Chain: ANSI #160 roller chain | Tensioner: Hydraulic | Motor: Hydraulic, low speed/high torque (qty 2) | Motor: Geroler
  • Custom Spicer | U - Joints: Permanently Lubricated 10C (qty 2)
  • Axle: Tri-Axle Spring
  • Air actuated with spring applied park brake
  • 425/65R22.5 Super Singles
  • 22.5" x 8.25" Hub Piloted Aluminum
  • Group 8-D, 1400 CCA (2) | AA (qty 6)
  • 24 Volt, 75 Amp
  • 24 Volt | System Protection: Fused
  • Tub: 8 rpm | Drum: 1340 rpm | Tip Speed: 10319 rpm | Belt: 860 ft/min
  • Air to Boil Temperature: 122 deg | Screen Area: 4069 sq in
  • Sound power (LwA) = 120.0 dB(A) Equivalent Continuous A-Weighted Sound Pressure at Operator's Ear (Laeq) = 100.0 dB(A) - Main Control Station Equivalent Continuous A-Weighted Sound Pressure at Operator's Ear (Laeq) = 77.0 dB(A) - Loader Cab
  • System: Load sense, pressure compensated / Closed loop / Open loop
  • Axial piston, variable displacement / Axial piston, variable displacment / Gear
  • Flow at Maximum RPM: 30.2 gpm / 33.8 gpm / 37.5 gpm / 10.7 gpm / 53.1 gpm
  • System relief pressure: 3000 psi / 5000 psi / 250 psi / 3615 psi
  • Continuous I-beam
  • Weld-In king pin - 2" (5.1 cm)
  • Tub Cover Positions: Transport and operate with hydraulic lock | Falling Object Protection at Control Station: Overhead and side protection
  • Maximum Reach of Loader: 29.5 ft | Tub Table Thickness: .5 in | Table Tilt Degrees: 92 deg | Millbox Opening: 27" x 69" (68.9 cm x 175.3 cm) | Inside Diameter of Tub: 10 ft | Inside Flare Diameter - At Base of Tub: 10.3 ft | Inside Flare Diameter - At Tub Opening: 13 ft | Wall Thickness: .3 in | Wear Liner Thickness: .6 in | Drum Diameter: 22.5 in | Tip Diameter: 31 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" (5.1 cm) | Screen: 72.4" x 35.8" x 10.3" (183.9 cm x 91 cm 21.2 cm) | Breaker Bar: 2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm) | Distance - Screen to Millbox Wall: 21.4 in | Idler Roller Diameter: 12 in | Idler Roller Bearing: 1 15/16" (4.9 cm) f-bolt flange | Standard Drive Roller Diameter: 13.8 in | Magnetic Drive Roller Diameter: 13.8 in | Operating Range: 300' (91.4 m) | Pedestal/Cab Rotation: 370 deg | Grapple Rotation: 360 deg | Front Intrusion Guard: 5/8" (1.6 cm) diaemter reinforced wire mesh
  • Maximum: 45.6 ft | Loader - Maximum: 45.9 ft
  • Maximum: 11.9 ft
  • Maximum: 162 in
  • Maximum - Conveyor Unfolded: 62.6 ft | Discharge System: 24 ft
  • Maximum - Cab in Operating Position: 18.8 ft | Loading: 11.3 ft | Load: Minimum = 11.9 ft, Maximum = 17 ft at 35 deg
  • Discharge System: 48 in
  • Tub: 4.7 ft
  • Drum: 65.3 in
  • 13.5 in
  • 60" (152.4 cm)
  • Tank: 500 gal
  • Volume with Filter: 76 qt
  • Tub Capacity: 15 cu yd
  • Tank: 100 gal
  • Loader at Full Reach: 4000 lbs | Loader at 10 ' (3.05 m): 12000 lbs
  • Fan: fixed pitch, hydraulic reverse | Tub Roller Quantity: 8 carrier, 8 Guide (16 total) | Tub Agitators: 4 | Number of Hammers: 10 | Number of Cutters: 20 | Cutter Block Types: Multiple styles, 2 bolt retension with 7/8" (22.2 mm) UNC fasteners | Number of Wipers: 4 | Number of Sides: 4 useable edges | Return Roller Quantity: 5 standard and 1 vibrating roller | Filtration Method: In-tank return filters (qty 2) | Number of Coolers: 1 | Components: Conveyor with auxiliary valve | Motor Series: Geroler, Heavy-Duty High-Torque (Qty 2) / Axial Piston, Fixed Displacement | Fan Series - FWD/REV: 1150/500 | Filtration Method: Spin on High Pressure | Display: Type LCD Multi-Function | Switches: CAN network, sealed membrane | Channel Setting: 50 channels | Grapple Type: Multiple tine | Loader Controls: Electric-over-hydraulic CAN-based system | Climate Controls: A/C and heat | Radio: AM/FM/WB/AUX Sirius satellite radio ready with two 4-in (10.2-cm) speakers
  • 78000 lbs / 90000 lbs | Tongue: 28800 lbs / 34500 lbs | Axle: 50000 lbs / 34500 lbs | Screen: 350-500 lb each | Grapple: 1450 lbs
  • Recommended: 15W40 / Hy-Power 68 / VMF Gold
  • Tub Table: T1 Steel | Wall:e T1 Steel | Wear Liner: Abrasion-resistant plate (Astralloy 4800)| Screen: AR400, reversible (qty 2) | Breaker Bar: T1 steel, replaceable | Splice: Flexco R2 stainless steel | Window: 3/8" (.95 cm) polycarbonate
  • Double row, spherical roller
  • Design: 330# with V-cleat