2025 Vermeer® Trommel Screens TR6400

Information

2025 Vermeer® Trommel Screens TR6400

TR6400 highlights
  • Tough and compact design
  • Quick change tensioned screens
  • Complete control for maximized productivity

Features may include:

Versatility
  • Compatibility with smaller gauge wire increases the open screen area helping overall production of the machine, particularly in applications when processing wetter materials.
  • Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that require frequent screen changes.
Convenient loading
  • A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.
Maintenance-friendly
  • A single large access door provides engine service access.
  • Lift bars lift and agitate material for thorough screening.
Complete control
  • Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Trommel Screens TR6400
  • Available
  • Operation: 295 in | Apron Opening: 37.5 in | Apron Conveyor Belt: 42 in | Self-Cleaning Tail Pulley: 38 in wide / 44 in (111.8 cm) wide
  • Operation: 16.7 ft | Apron Opening: 45 in | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg) | Conveyor Belt Stacking: 9 ft (2.7 m) (conveyor @ 25 deg)

Specifications

  • 2025
  • Vermeer®
  • Trommel Screens
  • TR6400
  • General
  • Deutz
  • Drum: 35.5 cu in (581.7 cu cm) | Conveyor: 38.4 cu-in / 14.2 cu-in
  • 4
  • Rating: 100 hp (74.5 kW)
  • Spin-on
  • Dual element
  • Tier 4F (Stage IV)
  • Fuel Consumption: 3 gph (11.4 L/h)
  • Leaf spring
  • 445/50 R22.5
  • 950 CCA
  • 120 amp
  • System Voltage: 12 V
  • Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min | Maximum Variable Overs Belt: 360 ft/min
  • 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar) | Drum Operation: 0-33.1 gpm (0-125.3 L/min)
  • Four independent hydraulic jacklegs | Collecting Conveyor: Part of trailer frame | Fines Conveyor: Engineered structural frame | Overs Conveyor: Engineered structural frame
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Drum Angle Adjustability: 0-5 deg | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.75 in (4.4 cm) double roller | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Self-Cleaning Tail Pulley: 8 in diameter | Head Pulley Takeup: 8 in | Self-Cleaning Return Idlers: 2, 4 in (10.2 cm) diameter; 1, 5 in (12.7 cm) diameter | Conveyor Belt Size: 42 in (106.7 cm) | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Self-Cleaning Tail Pulley Dimensions 8 in (20.3 cm) diameter, crowned wing pulley, 1.75 in (4.4 cm) shaft | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 32-in centers
  • 40 ft
  • 99 in
  • 13.1 ft
  • Operation: 54 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft | Overs Conveyor: 19.2 ft
  • Operation: 16.7 ft | Apron Opening: 45 in | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg) | Conveyor Belt Stacking: 9 ft (2.7 m) (conveyor @ 25 deg)
  • Operation: 295 in | Apron Opening: 37.5 in | Apron Conveyor Belt: 42 in | Self-Cleaning Tail Pulley: 38 in wide / 44 in (111.8 cm) wide
  • 9.5 ft (2.9 m) from ground level at operating incline
  • Bottom: 37.5 in
  • Belt: 36 in
  • Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
  • Tank: 50 gal
  • Tank: 80 gal
  • With Filter: 10 qt
  • 6.5 cu yd
  • 37000 lbs | Hitch: 4200 lbs
  • Radiator Fan: Suction | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Self-Cleaning Tail Pulley: Crowned wing pully | Self-Cleaning Return Idlers: Rattle roller
  • Recommended: Mobil 15W40
  • Bristle: Polyethylene
  • Conveyor: 220 lb (99.8 kg), 2 ply, 2/6" x 1/16" (4.8 mm x 1.6 mm)