2025 Vermeer® Horizontal Grinders HG6800TX

Information

2025 Vermeer® Horizontal Grinders HG6800TX

HG6800TX highlights
  • A flagship horizontal grinder built to maximize productivity and efficiency
  • Robust build quality for confident longevity
  • Maintenance-friendly design optimizes serviceability
  • Equipped with Vermeer innovations to help protect your investment and optimize efficiency

Features may include:

Productive and powerful
  • For enhanced flexibility within a single machine, a dedicated chip drum, adjustable for product size ranging from .125 in - 1 in (.3 cm - 2.5 cm), is available.
  • The HG6800TX features low sidewalls to aid in feeding whole trees with minimal restriction, reducing the number of operator interactions with the material after loading and allowing the operator to focus on the next load.
  • The Series III hardfaced duplex drum offers durability and convenient maintenance, with the ability to remove and replace single hammers and balance the drum externally.
Intelligent operation
  • The SmartFeed system monitors engine rpm and adjusts grinding speed for optimal machine performance.
  • An industry-leading, full-function, wireless remote control lets you adjust machine settings from the cab as conditions change, including control of the infeed settings, engine droop, conveyor height and more.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.
Safety
  • Reduce the quantity and distance of thrown material debris with the Thrown Object Deflector (TOD), strategically placed to reduce interference when loading over-length material.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Horizontal Grinders HG6800TX
  • C27
  • Ultra-low sulfer diesel (<15 ppm)
  • Available
  • Feed Table: 60 in | Infeed Roller: 56.3 in | Feed opening: 56.4-in (143.3-cm) | Millbox Opening: 60" W x 38" H | 48 in
  • Loading: 6 ft | Feed opening: 38-in (96.5-cm) | Maximum Feed: 50 in | Millbox Opening: 38" | Load: 16.3 ft

Specifications

  • 2025
  • Vermeer®
  • Horizontal Grinders
  • HG6800TX
  • Horizontal
  • C27
  • Caterpillar
  • Tier 4F (Stage 4)
  • 12
  • 950 hp
  • 3212 ft-lb
  • Dry-type with primary and secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid
  • Track Drive: Hydrostatic with planetary transmission
  • Max Consumption: 47.5 gph
  • Ultra-low sulfer diesel (<15 ppm)
  • Hydraulic-operated wet clutch with PTO | Engagement: Push-button | System Type: Open-loop
  • Motor: Fixed displacement, geroler | Planetary (Qty 2): 34.2:1
  • Air-ride
  • Radial piston motor | Air-actuated with spring-applied parking brake | Track: Spring-applied, hydraulic-release wet disc parking brake
  • 445/50R22.5 LR L (super singles)
  • Aluminum
  • Group 8-D, 1400 CCA (Qty 2) | Radio: AA (Qty 6)
  • 24 volt | System Protection: Fused
  • Drum: 1200 rpm | Belt: 877 ft/min | tracks Maximum: 2.8 mph | tracks Maximum Creep - (Low): 1.4 mph
  • Air to Boil Temperature: 126 deg
  • 120 dB(A)
  • System: Open-loop, pressure- and flow-compensated | Fan System: Open-loop, pressure compensated | Screen Area: 3583 sq in
  • Variable displacement, axial piston | Clutch: Fixed displacement, gear pump
  • At Maximum RPM: 63.3 gpm / 32.3 gpm |/ 25.7 gpm | Clutch: 8.9 gpm | Tracks: 57.6 gpm
  • System Relief: 4200 psi / 3000 psi | Clutch: 260 psi | Tracks: 5000 psi
  • Fifth wheel
  • DT6
  • Trailer Type: 12-24V LED
  • Infeed Roller Diameter: 36.1 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 6 in | Center Retention Pin Dimensions: 2" dia x 79.35" L | Knife Thickness - 9 in: .625 in (1.6 cm) | Shaft diameter - 9 in: 6.5 in | Knife Thickness - 4.5 in: .625 in (1.6 cm) | Shaft diameter - 4.5 in: 6.5 in | Screen Dimensions: 1" thick | Liner Dimensions: .75, 1" (1.9 cm, 2.5 cm) thick | Anvil Type: Fabricated steel with replaceable wear surfaces | Anvil Dimensions: 6.6" x 18.2" x 81" (16.7 cm x 46.2 cm x 205.7 cm) | Idler Roller Diameter: 12 in | Idler Roller Bearing: 1-15/16, 4-bolt flange | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
  • Maximum: 48.1 ft | with Dolly: 48.6 ft
  • Maximum: 10 ft | with Dolly: 10 ft
  • Maximum: 12 ft | with Dolly: 12.8 in
  • Maximum (Operation): 56.5 ft | Center Retention Pin Dimensions: 79.35" | 89.3 ft | Track on Ground: 142" (360.7 cm)
  • Feed Table: 60 in | Infeed Roller: 56.3 in | Feed opening: 56.4-in (143.3-cm) | Millbox Opening: 60" W x 38" H | 48 in
  • Loading: 6 ft | Feed opening: 38-in (96.5-cm) | Maximum Feed: 50 in | Millbox Opening: 38" | Load: 16.3 ft
  • Drum: 62.4 in
  • Cut Adjustable - 9 in: .125 in (.31 cm) to 1 in (2.5 cm) | Cut Adjustable - 4.5 in: 1.125 in (2.86 cm) to 1.5 in (3.81 cm)
  • 5.3 in
  • Tank: 350 gal
  • Volume with Filter: 71.9 qt
  • Tank: 100 gal
  • Coolant Capacity (Engine and Radiator): 45 gal
  • Fan: (Qty 2) Variable-speed, reversible | Fan - CAC: Hydraulic (variable speed) | Tooth Design: Serrated bars | Number of Teeth: 12 | Deflector Position: Variable | Number of Hammers: 10 | Number of Tips: 20 | Tip option 1: 2-bolt | Tip types: Premium wide | Useable Edges - 9 in: 1 | Number of Pockets - 9 in: 14 | Shaft Retention Type - 9 in: Keyless bushing | Useable Edges - 4.5 in: 1 | Number of Pockets - 4.5 in: 14 | Shaft Retention Type - 4.5 in: Keyless bushing | Number of Screens: 2 | Return Roller Quantity: 6 | Filtration Method: Dual in-tank return filters with suction strainer | Number of Coolers: 1 | Fan Series - FWD/REV: Reversible | Filtration Method: Spin-on, pressure filter, B6 = 1000 | Number of Coolers: 1 | Display Type: LCD | Switches: Push-button | Switches: Sealed membrane | Number of Axles: 3 | Track Type: D5 double grouser | Type of Idler: D5 excavator rollers | Number of Idlers 20
  • 92000 lbs | Tongue - with Dolly: 45000 lbs | Axle - with Dolly: 60000 lbs | Engine Option 1 with Dolly: 105000 lbs | Dolly: 9500 lbs | Infeed Roller: 2460 lbs | Infeed roller with arm: 4945 lbs | Drum: 5321 lbs | Drum - 9 in: 6707.5 lbs | Drum - 4.5 in: 6707.5 lbs | Screen: 470 lbs
  • Recommended: CAT DEO-ULS, or API CJ-4, or ACEA E9 (15w-40) | Recommended: Vermeer HyPower 68 | Recommended: Vermeer VMF Gold
  • Drive Type: V-belt | Design: 3 ply - 330# or straight warp single ply 330# both with V cleat
  • Flare: Integrated with infeed | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Fabricated steel | 9 in:A8 mod chipper steel | 4.5 in: A8 mod chipper steel | Screen Type: Abrasion-resistant steel | Millbox lid liner: Abrasion-resistant steel | Millbox Lid Liner Dimensions: Abrasion-resistant steel | Splice: R2-stainless steel or super splice
  • Feed: Welded slat chain
  • Double row, sperical roller
  • 14 | Bolts/Knife: 4 | 4.5 in: 14 | Bolts/Knife: 2