2025 Vermeer® T1055III Pipeline Trencher Tier 3

Information

2025 Vermeer® T1055III Pipeline Trencher Tier 3

T1055III highlights
  • For trenching projects requiring high horsepower and deep digging depths, Vermeer offers the T1055 trencher
  • When you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through

Features may include:

Maximum ground penetration and low chain wear
  • Perform rock excavation effectively with minimal chain wear due to its low-speed, high-torque, splined headshaft motor.
Advanced technology for improved machine efficiency
  • SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Cut a deeper trench with a sectionalized boom
  • Complimentary to the sectionalized booms, the crumber can be adjusted to accommodate a variety of digging depths.
Elevated operator visibility and comfort
  • The elevating cab allows optimal visibility and added comfort with the air ride seat.
  • The sealed cab has self-contained heating and air conditioning with sound attenuating foam.
  • It is also a rollover protective module (ROPM) and provides falling object protection (FOPS).

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • T1055III Pipeline Trencher Tier 3
  • C13 ACERT
  • Available
  • Ranges: 116"-122" (294.6 cm - 309.9 cm) | Belt: 30 in
  • Range: 135" (342.9 cm) | Discharge Range: 64"-78" (162.6 cm - 198.1 cm)

Specifications

  • 2025
  • Vermeer®
  • T1055III Pipeline Trencher
  • Tier 3
  • Ditchers
  • C13 ACERT
  • Caterpillar
  • Tier 3
  • Gross: 415 hp
  • 2100 RPM
  • 6
  • Dry-type exhaust aspirated
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full flow
  • 20.9 gph
  • Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Range: 8.8 hours
  • Maximum Ground - Low: 57.1 ft/min / High: 114 ft/min | Conveyor Belt Range: 0-1070 fpm (0-326 m/min)
  • Minimum: 9.4 psi | Maximum: 13.9 psi
  • Pressure-and-flow-compensated (load-sensing)
  • Flow at Maximum RPM: 27.9 gpm
  • Setting: 2500 psi
  • Approach Angle: 16 deg | Maximum Engine Operating Angle: 35 deg | Conveyor Shift Distance Range: 5" and 65" (12.7 and 165.1 cm)
  • With 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft | With 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | With 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | With 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | With 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 41 ft | With 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 35.8 ft | With 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 38.3 ft | With 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 40.8 ft | Conveyor: 108" or 168" (274.3 cm or 426.7 cm)
  • Range: 135" (342.9 cm) | Discharge Range: 64"-78" (162.6 cm - 198.1 cm)
  • Ranges: 116"-122" (294.6 cm - 309.9 cm) | Belt: 30 in
  • 176 in
  • Pad Ranges: 24" (61 cm) or 30" (76.2 cm)
  • Tank: 184 gal
  • Tank: 152 gal
  • Range: 87,000 lb - 124,000 lb (39,463.5 kg - 56,245.5 kg)
  • Control System: TEC Plus with SmartTEC
  • Drive: Dual path hydrostatic with planetary transmission | Pad: Single or double grouser | Size: D7G
  • Conveyor Belt Style: Cleat or finger type
  • Style: Curved
  • Direction: Right or left
  • Vermeer HyPower 68 or Vermeer HyPower 100