2024 Vermeer® Pipeline Directional Drills D100x140

Information

2024 Vermeer® Pipeline Directional Drills D100x140

There is no substitute for downhole power, so try the Vermeer D100x140 S3 drill.

With a maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm, the D100x140 S3 Navigator® horizontal directional drill offers an exceptional one-two punch in response to your most challenging projects. To get you there and back, select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm) Firestick® drill rod. Consider the 15 ft (4.6 m) to minimize your footprint, while selecting 20 ft (6.1 m) will offer increased onboard rod carrying capacity.

Features may include:

Firestick drill rod
  • Experience the difference that has made one-piece, forged Firestick® drill rod the industry benchmark.
Wireless remote-controlled knuckle boom crane
  • The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).
Dual displays
  • State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.
Angled, true open-top vises
  • Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.
Increase your range
  • Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Pipeline Directional Drills D100x140
  • Available
  • with cab: 350.5 cm

Specifications

  • 2024
  • Vermeer®
  • Pipeline Directional Drills
  • D100x140
  • Directional
  • CAT
  • Gross: 205.1 kw
  • 2200 rpm | Maximum Spindle Speed at Max Engine RPM: 215 rpm
  • Twin turbocharged
  • Maximum Spindle Torque (Low at Maximum Engine RPM): 18981.5 Nm | Maximum Spindle Torque (Medium at Maximum Engine RPM): 14236.1 Nm | Maximum Spindle Torque (High at Maximum Engine RPM): 9490.7 Nm
  • Ultra low sulfur diesel | Fuel consumption: 56.8 lph
  • Thrust: 444.8 kN | Pullback: 444.8 kN
  • Maximum Carriage Speed at Maximum Engine RPM: 53.3 m/min | Maximum Ground Drive Speed at Maximum Engine RPM: 4.5 km/h
  • at Operator's Ear - 15 ft (4.6 m): 82 dB(a) | at Operator's Ear - 20 ft (6.1 m): 84 dB(a)
  • Parker PGP315 Gear
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 25 | Maximum Operating Angle (Left/Right): 25 | Minimum Bore Diameter: 15.2 cm | Rotation: 360 deg | Maximum Reach: 594.4 cm
  • Min 15 ft (4.6 m): 957.1 cm | Min 20 ft (6.1 m); 1109.5 cm
  • Min: 259.1 cm | With cab: 259.1 cm
  • Min: 350.5 cm
  • with cab: 350.5 cm
  • Tank: 435.3 L
  • Tank: 302.8 L | System: 454.2 L
  • 2299.7 kg | Boom Extended/Max Reach: 1800.8 kg
  • 15 ft (6.1 m): 22815.7 kg | 20 ft (6.1 m): 23813.6 kg | (Cab Option) - 15 ft (4.6 m): 22588.9 kg | (Cab Option) - 20 ft (6.1 m): 25954.6 kg
  • Automated Rod Loader: Semi-automated