2025 Vermeer® Trommel Screens TR6400
- Year 2025
- Make Vermeer®
- Model Trommel Screens
2025 Vermeer® Trommel Screens TR6400
2025 Vermeer® Trommel Screens TR6400
TR6400 highlights- Tough and compact design
- Quick change tensioned screens
- Complete control for maximized productivity
Features may include:
Versatility- Compatibility with smaller gauge wire increases the open screen area helping overall production of the machine, particularly in applications when processing wetter materials.
- Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that require frequent screen changes.
- A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.
- A single large access door provides engine service access.
- Lift bars lift and agitate material for thorough screening.
- Operators can control the machine through either the Vermeer DP10 display mounted on the control panel.
Engine
Engine Manufacturer
Deutz
Displacement
3.6 L
Cylinder Liners
4
Engine Power
Rating: 100 hp (74.5 kW)
Oil Filter
Spin-on
Air Cleaner
Dual element
Emissions
Tier 4F (Stage IV)
Motor
Displacement
Drum: 35.5 cu in (581.7 cu cm) | Conveyor: 38.4 cu-in / 14.2 cu-in
Fuel System
Fuel System
Fuel Consumption: 3 gph (11.4 L/h)
Suspension
Suspension
Leaf spring
Wheels & Tires
Tires, Rear Specification
445/50 R22.5
Battery
Battery
950 CCA
Electric
Alternator
120 amp
Electrical
System Voltage: 12 V
Operational
Operating Speed
Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min | Maximum Variable Overs Belt: 360 ft/min
Hydraulics
Hydraulic Pump
77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar) | Drum Operation: 0-33.1 gpm (0-125.3 L/min)
Chassis
Frame Type
Four independent hydraulic jacklegs | Collecting Conveyor: Part of trailer frame | Fines Conveyor: Engineered structural frame | Overs Conveyor: Engineered structural frame
Dimensions
Dimensions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Drum Angle Adjustability: 0-5 deg | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.75 in (4.4 cm) double roller | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Self-Cleaning Tail Pulley: 8 in diameter | Head Pulley Takeup: 8 in | Self-Cleaning Return Idlers: 2, 4 in (10.2 cm) diameter; 1, 5 in (12.7 cm) diameter | Conveyor Belt Size: 42 in (106.7 cm) | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Self-Cleaning Tail Pulley Dimensions 8 in (20.3 cm) diameter, crowned wing pulley, 1.75 in (4.4 cm) shaft | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 32-in centers
Transport Length
40 ft
Transport Width
99 in
Transport Height
13.1 ft
Length
Operation: 54 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft | Overs Conveyor: 19.2 ft
Height
Operation: 16.7 ft | Apron Opening: 45 in | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg) | Conveyor Belt Stacking: 9 ft (2.7 m) (conveyor @ 25 deg)
Width
Operation: 295 in | Apron Opening: 37.5 in | Apron Conveyor Belt: 42 in | Self-Cleaning Tail Pulley: 38 in wide / 44 in (111.8 cm) wide
Hopper Height
9.5 ft (2.9 m) from ground level at operating incline
Hopper Width
Bottom: 37.5 in
Conveyer Width
Belt: 36 in
Capacities
Volume
Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
Fuel Capacity
Tank: 50 gal
Hydraulic Capacity
Tank: 80 gal
Oil capacity
With Filter: 10 qt
Hopper Capacity
6.5 cu yd
Weights
Weight
37000 lbs | Hitch: 4200 lbs
Features
Features
Radiator Fan: Suction | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Self-Cleaning Tail Pulley: Crowned wing pully | Self-Cleaning Return Idlers: Rattle roller
Oil Type
Recommended: Mobil 15W40
Construction Material
Bristle: Polyethylene
Belt Type
Conveyor: 220 lb (99.8 kg), 2 ply, 2/6" x 1/16" (4.8 mm x 1.6 mm)