2025 Vermeer® Trommel Screens TR626EM

Information

2025 Vermeer® Trommel Screens TR626EM

TR626EM highlights
  • Machine built to minimize jobsite disturbance
  • Complete control allows for increased efficiency when it matters most
  • Spend less time on maintenance and more time being productive

Features may include:

Convenient loading
  • Forget the loading ramps with the help of the low hopper infeed height of the TR626 trommel screen.
  • Move material smoothly without bridging, thanks to a tall, wide throat opening.
Safety
  • Startup delay and alarm systems notify your whole crew when the machine is about to start.
Versatility
  • Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.
  • The fines conveyor can have straight discharge or ordered with 180-degree radial arc. Both offer adjustable stacking height to reduce material loss and reduced dust in windy condition.
Minimized jobsite disturbance
  • The machine is powered by two industrial-duty, fully-enclosed and fan-cooled electric motors, a single 150-hp (112-kW) motor powering the hydraulic pump stack and a .75-hp(.6-kW) motor powering the cooling fan for the hydraulic system.
Advanced controls
  • Can be ordered with a 20-ft or 28-ft (6.1 m or 8.5 m) length, with standard or magnetic head pulley and are fully height adjustable to reduce dust and material loss in windy conditions.
  • Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Trommel Screens TR626EM
  • Available
  • Operation: 113 in | Apron Opening: 43 in | Apron Conveyor Belt: 48 in | Drum Support: Four steel trunnion rollers 4 in (10.2 cm) | Head/Tail Pulley Type: 38" (99.65 cm) / 32" (81.3 cm) | Self-Cleaning Tail Pulley: 38" (96.5 cm) / 51" (129.5 cm) | Conveyor Belt: 48" (121.9 cm) with raised crescent
  • Operation: 15.9 ft | Apron Opening: 34 in | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)

Specifications

  • 2025
  • Vermeer®
  • Trommel Screens
  • TR626EM
  • General
  • Siemens
  • 150 hp
  • Drum: 48.8 cu in (800 cu cm) | Conveyor: 38.4 cu-in / 21.4 cu-in
  • Fuel Consumption: 3.5 gph (13.3 L/hr) under most operating conditions
  • Leaf spring
  • 235-75R 17.5H qty. 4
  • 950 cold cranking amps
  • Motor: 460 V, 3 phase | System Voltage: 460 V
  • Motor: 1800 rpm | Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 405 ft/min / 405 ft/min / 705 ft/min | Maximum Variable Overs Belt: 290 ft/min
  • 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)
  • 4 independent hydraulic jacklegs | Collecting Conveyor: Part of trailer frame | Fines Conveyor: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing / 2" x 8" (5.1 cm x 20.3 cm) structural steel building | Overs Conveyor: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • Hopper Opening: 13.2 ft x 5.3 ft (4 m x 1.6 m) | Apron Conveyor Rollers: 4" (10.2 cm) diameter | Drum Diameter: 6 ft | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25-in (3.2-cm) sealed ball bearings | Head/Tail Pulley Type: 12" (30.5 cm) diameter / Crowned, 9.75" (24.8 cm)| Head Pulley Bearing: 2.4 in (6.1 cm) / 1.94 in (4.9 cm) pillow block | Rubber Flashing: Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4" (10.2 cm) diameter | Head Pulley Type: 12" (30.5 cm) diameter | Self-Cleaning Tail Pulley: 10" (25.4 cm) diameter, with 2.4" (6.1 cm) shaft | Self-Cleaning Return Idlers: 11, each 4" (10.2 cm) diameter | Idler Type: 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers | Self-Cleaning Return Idlers: 4, each 4" (10.2 cm) diameter | Solid Return Idler Size: 4" x 8" diameter
  • 54.5 ft
  • 113 in
  • 13.5 ft
  • Operation: 84.4 ft | Apron Conveyor: 16 ft | Drum: 26 ft | Fines Conveyor: 72.5 ft / 30.5 ft | Overs Conveyor: 19 ft
  • Operation: 15.9 ft | Apron Opening: 34 in | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)
  • Operation: 113 in | Apron Opening: 43 in | Apron Conveyor Belt: 48 in | Drum Support: Four steel trunnion rollers 4 in (10.2 cm) | Head/Tail Pulley Type: 38" (99.65 cm) / 32" (81.3 cm) | Self-Cleaning Tail Pulley: 38" (96.5 cm) / 51" (129.5 cm) | Conveyor Belt: 48" (121.9 cm) with raised crescent
  • 9.5' (2.9 m) from ground level at operating incline
  • Bottom: 48 in
  • Belt: 36 in
  • Approximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
  • Tank: 200 gal
  • 6 cu yd
  • Apron Conveyor Rollers: qty. 14 | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Head/Tail Pulley Type: Rubber lagged
  • 65000 lbs | Hitch: 30000 lbs
  • Bristle: Polyethylene
  • Conveyor: 220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)