2025 Vermeer® Trommel Screens TR626 - Tier 3
- Year 2025
- Make Vermeer®
- Model Trommel Screens
- Engine 4045H
2025 Vermeer® Trommel Screens TR626 - Tier 3
2025 Vermeer® Trommel Screens TR626 - Tier 3
TR626 highlights- Load your machine with convenience and confidence
- Complete control allows for increased efficiency when it matters most
- Spend less time on maintenance and more time being productive
- Fine conveyor
- Overs conveyor
Features may include:
Convenient loading- Forget the loading ramps with the help of the low hopper infeed height of the TR626 trommel screen.
- Move material smoothly without bridging, thanks to a tall, wide throat opening.
- Startup delay and alarm systems notify your whole crew when the machine is about to start.
- The fines conveyor can have straight discharge or ordered with 180-degree radial arc. Both offer adjustable stacking height to help reduce material loss and reduced dust in windy condition.
- Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.
- Can be ordered with 20-ft or 28-ft (6.1 m or 8.5 m) length, with standard or magnetic head pulley and are fully height adjustable to help reduce dust and material loss in windy conditions.
- Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.
Engine
Engine Manufacturer
John Deere
Engine
4045H
Cylinder Liners
4
Engine Power
Rating: 125 hp (93.2 kW) @ 2400 rpm
Engine Torque
355 ft-lb (481.3 Nm) @ 1500 rpm
Oil Filter
Spin-on
Air Cleaner
Dual element oversized
Emissions
Tier 3
Motor
Displacement
Drum: 48.8 cu in (800 cu cm) | Conveyor: 38.4 cu-in / 21.4 cu-in
Fuel System
Fuel System
Fuel Consumption: 3.5 gph (13.3 L/hr) under most operating conditions
Suspension
Suspension
Leaf spring
Wheels & Tires
Tires, Rear Specification
235-75R 17.5H qty. 4
Battery
Battery
950 cold cranking amps
Electric
Alternator
120 amp
Electrical
System Voltage: 12 V
Operational
Operating Speed
Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm | Fines Belt: 405 ft/min / 405 ft/min / 705 ft/min | Maximum Variable Overs Belt: 290 ft/min
Hydraulics
Hydraulic Pump
62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa]) | Drum Operation: 0-42.6 gpm (161.3 L/min)
Chassis
Frame Type
4 independent hydraulic jacklegs | Collecting Conveyor: Part of trailer frame | Fines Conveyor: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing / 2" x 8" (5.1 cm x 20.3 cm) structural steel building | Overs Conveyor: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
Dimensions
Dimensions
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 13.2' x 5.3' (4 m x 1.6 m) | Apron Conveyor Rollers: 4" (10.2 cm) diameter | Drum Diameter: 6 ft | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter | Thrust Bearing Diameter: 5 in | Thrust Bearing Face: 2.9 in | Drum Angle Adjustability: 0-7 degrees | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Head/Tail Pulley Type: 12" (30.5 cm) diameter / Crowned, 9.75" (24.8 cm)| Head Pulley Bearing: 2.5" (6.4 cm) pillow block | Rubber Flashing: Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Tail Pulley Takeup: 12 in | Self-Cleaning Return Idlers: 6, each 4" (10.2 cm) diameter | Head Pulley Type: 12" (30.5 cm) diameter | Self-Cleaning Tail Pulley: 10" (25.4 cm) diameter, with 2.4" (6.1 cm) shaft | Self-Cleaning Return Idlers: 11, each 4" (10.2 cm) diameter | Idler Type: 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104 cm) centers | Self-Cleaning Return Idlers: 4, each 4" (10.2 cm) diameter | Solid Return Idler Size: 4" x 8" diameter
Transport Length
54.5 ft
Transport Width
113 in
Transport Height
13.5 ft
Length
Operation: 84.4 ft | Apron Conveyor: 16 ft | Drum: 26 ft | Fines Conveyor: 72.5 ft / 30.5 ft | Overs Conveyor: 19 ft
Height
Operation: 15.9 ft | Apron Opening: 34 in | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Conveyor Belt Stacking: 3' (.9 m) x 10' (3.1 m)
Width
Operation: 113 in | Apron Opening: 43 in | Apron Conveyor Belt: 48 in | Drum Support: Four steel trunnion rollers 4 in (10.2 cm) | Head/Tail Pulley Type: 38" (996.5 cm) / 32" (81.3 cm) | Self-Cleaning Tail Pulley: 38" (96.5 cm) / 51" (129.5 cm) | Conveyor Belt: 48" (121.9 cm) with raised crescent
Hopper Height
9.5' (2.9 m) from ground level at operating incline
Hopper Width
Bottom: 48 in
Conveyer Width
Belt: 36 in
Capacities
Volume
Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%
Fuel Capacity
Tank: 100 gal
Hydraulic Capacity
Tank: 200 gal
Oil capacity
With Filter: 15.5 qt
Hopper Capacity
6 cu yd
Features
Chassis: 22500 lbs
Weights
Weight
65000 lbs | Hitch: 30000 lbs
Features
Features
Radiator Fan: Pusher type | Apron Conveyor Rollers: qty. 14 | Drum Drive Chain: 140 WT | Maximum Screen Panels: 8 | Head/Tail Pulley Type: Rubber lagged
Construction Material
Bristle: Polyethylene
Belt Type
Conveyor: 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)