2024 Vermeer® Stump Cutters SC802

Information

2024 Vermeer® Stump Cutters SC802

Grind down the big jobs.

Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.

Features may include:

Rear deck containment area
  • Collect chips as you work in the 68 cu ft (1.9 cu m) containment area under the rear deck.
Remote-controlled cutter operation
  • Keep your distance when you opt for the remote control, which operates the cutter up to 100’ (30 m) away from the unit.
Extended limited warranty
  • Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Stump Cutters SC802
  • Manufacturer - Option One: Dexter
  • Available
  • 202.7 cm
  • 200.7 cm

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC802
  • Stump
  • Upper Gearbox: Straight bevel | Lower Gearbox: Straight bevel
  • Rubber torsional axle
  • Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
  • ST235/80/R16 load range G
  • 16 in x 6 in (40.6 cm x 15.2 cm) 6 bolt circle
  • Cutterwheel: 881 rpm
  • Sound Power - Engine Option Two: 112.3 dB(a) | Sound Power: 108.0 dB(a)
  • 950
  • Shutdown System: Low oil pressure, high engine coolant temp | System Voltage: 12 Volt
  • System relief: 137.9 bar
  • Flow at Maximum RPM: 12.1 L/min
  • Manufacturer - Option One: Dexter
  • Pin, pintle, 2 1/6" (1.6 cm) ball
  • Description: Reinforced 4" (10.2 cm) square tubing
  • Warning: Engine warning | Trailer Type: LED
  • Chip Containment: 1.9 cu m | Driveshaft - U Joints: Two standard with double lip seal | Tongue Extension: 60" (152.4 cm) | Cutterwheel Cut Below Ground: 63.5 cm | Cutterwheel Cut Above Ground: 88.9 cm | Cutterwheel Straight Line Dimension: 243.8 cm | Cutterwheel Diameter without Teeth: 71.1 cm | Cutterwheel Thickness: 2.4 cm
  • 424.9 cm | Tongue In: 424.9 cm | Tongue Extended: 234 in (594.4 cm) |
  • 202.7 cm
  • 200.7 cm
  • 1.6 L | Lower Gearbox: 2.1 L
  • Tank : 22.7 L
  • Display: Multifunction Display (MFD) | Operator Vision Shield Description: Abrasion-resistant coated poly carbonate | Tongue Description: Extendable | Control Station Description: Swing-out | Type - Option One: Weld-on | Driveshaft: Rubber dampened with 2 universal joints | Fender Description: Weld-on | Switches: Ignition, throttle and clutch | Controller: Operation with AutoSweep | Number of Pockets: 42 | Tooth Description: Yellow Jacket™ cutter system | Number of Teeth: 42 | Number of Indexes: 2 | Filtration Method: 6 micron full flow return filter; suction strainer | Cutterwheel Guard | Directional Control | Reversible Pockets | Toolbox Description | Flow Control | System Type: Gear pump, pressure balanced
  • Engine Option One: 1832.5 kg | Standard Gauges: MFD Multifunction LCD Display | Tongue - Engine Option Two: 172.4 kg | Engine Option One: 1995.8 kg | Tongue - Engine Option One: 208.7 kg
  • Rubber torsional axle
  • SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended: Vermeer HyPower 68