2025 Vermeer® Stump Cutters SC48TX

Information

2025 Vermeer® Stump Cutters SC48TX

SC48TX highlights
  • Efficient performance across stumps of all sizes
  • Optimal power delivery at the stump
  • Enhanced jobsite flexibility

Features may include:

Chews through a lot
  • The 48-hp (36-kW) diesel engine delivers optimal fuel economy, durability and performance for efficient stump cutting of all sizes.
  • This direct-drive system delivers the maximum amount of power to the cutter wheel and requires minimal maintenance.
  • Exclusive SmartSweep control system monitors engine load, providing continuous feedback for a smooth, consistent cutter wheel sweep rate, maximizing efficiency and productivity while minimizing machine wear and tear.
  • With exceptional straight-line cutting dimensions, the SC48TX can tackle stumps big and small efficiently, with minimal need for repositioning.
Jobsite flexibility
  • Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.
Operator safety
  • The swing out control station helps protect the operator from thrown objects while providing optimal visibility at the stump.
  • The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Stump Cutters SC48TX
  • C1.7
  • Control Station Description: Swing out
  • Ultra-low sulfur diesel
  • Available
  • Track Rubber: 7-in
  • Non-remote unit: 76 in | Remote unit: 85 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC48TX
  • Stump
  • C1.7
  • CAT
  • T4F/Stage V
  • 3
  • Gross (Maximum): 48 hp
  • 123 ft-lb
  • Dry-type, restriction indicator, evacuator valve and safety element
  • Spin-on
  • Medium: Water/antifreeze
  • Max Fuel Consumption: 2.9 gph
  • Ultra-low sulfur diesel
  • Electric clutch with brake
  • Lower: Straight bevel
  • 2 universal joints | U Joints: 2 standard with double lip seal
  • Spring-applied and hydraulically-released dual parking brakes
  • 950 CCA
  • 85A
  • System Voltage: 12
  • Cutterwheel: 1235 rpm | Track Drive - High Travel: 1.5 mph / Low Travel: 1.1 mph | Ground Drive - Low Travel: 100 ft/min / High Travel: 140 ft/min
  • 107 dB(A)
  • System Type: Tandem gear pump, pressure balanced | Filtration Method: Full-flow 4-micron return filter, suction strainer
  • Pump Flow at Maximum RPM: 11 gpm
  • System relief: 2900 psi | Track: 2900 psi
  • Bearing - Soft Ground: 5.7 psi
  • Track Drive: Tandem gear pump, pressure balanced
  • Control Station Description: Swing out
  • Welded tube and plate steel
  • Maximum Angle of Continuous Operation: 35 deg | Fan: 16.5 in | Cutterwheel Diameter: 24 in | Cutterwheel Thickness: 1.4 in | Cutterwheel Straight Line: 65 in | Cutterwheel Cut Above Ground: 28 in | Cutterwheel Cut Below Ground: 16 in
  • 140 in
  • Track Rubber: 7-in
  • Non-remote unit: 76 in | Remote unit: 85 in
  • Retracted: 35 in | Extended: 49 in
  • On Ground: 47 in (119.4 cm)
  • Tank: 14.5 gal
  • Tank: 9 gal
  • Volume with Filter: 5.3 qt | Lower Gearbox: 1.6 qt
  • Chip Containment: 23 cu ft
  • Tooth: Vermeer cutting system | Number of Teeth: 27 | Number of wear plates: 6 | Reversible Pockets/Teeth: 24 | Type of Idler: Cast | Number of Idlers: 7
  • 3750 lbs
  • Recommended Oil: 10W-30 | Hydraulic: Vermeer highpower 68 | Lower Gearbox: SAE 75W90 synthetic gear oil