2024 Vermeer® Stump Cutters SC382

Information

2024 Vermeer® Stump Cutters SC382

The SC382 was made for the tough stumps on your jobsite.

This SC382 Vermeer stump cutter is equipped with a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine. The optimized cutting wheel on the SC382 gives this machine aggressive cutting capabilities.

Features may include:

Standard four-wheel drive
  • The SC382 stump cutter is equipped with standard four-wheel drive to offer traction and maneuverability in difficult transport conditions.
Operator presence system
  • The operator presence system is intended to enhance operator safety by automatically stopping the cutter wheel when the operator releases the hydraulic cutter wheel controls.
37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine
  • The SC382 stump cutter has a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Stump Cutters SC382
  • Control Station Description: Fixed side location
  • Available
  • 127.3 cm
  • 134.6 cm

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC382
  • Stump
  • Steerable Axle Type: Hydraulic steering, oscillating axle
  • Rigid/fixed (rear)
  • Spring-applied, hydraulic release at rear motors
  • Tires - Option One: 5.7"x 8" (14.5 x 20.3 cm) dual standard
  • 400 CCA
  • Shutdown System: Engine low oil pressure | System Voltage: 12 V
  • Low Travel: 19.8 m/min | High Travel: 39.6 m/min | Cutterwheel: 1560 rpm
  • System relief: 170.3 bar
  • Flow at Maximum RPM: 624.2 L/min
  • Flow Control: SmartSweep
  • Control Station Description: Fixed side location
  • Description: Welded tube and plate steel
  • Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengage status
  • Chip Containment: .2 cu m | Cutterwheel Cut Below Ground: 38.1 cm | Cutterwheel Cut Above Ground: 61 cm | Cutterwheel Straight Line Dimension: 119.4 cm | Cutterwheel Diameter without Teeth: 43.2 cm | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Cutterwheel Thickness: 1.3 cm | Bearing Dimensions: 1.3 bore | Degree of Oscillation: 12 deg | Jackshaft Dimension: 1.3 | Cutterwheel Shaft: 1.8" (4.8 cm)
  • Transport (without duals): 90.2 cm
  • 299.7 cm
  • 127.3 cm
  • 134.6 cm
  • Tank: 24.6 L
  • With Chip Blade Option (Additional): 85 lbs (38.6 kg) | Engine Option One: 884.5 kg
  • Jackshaft Bearing Type: Sealed ball | Reversible Pockets: 20 | Directional Control: Electric over hydraulic | Switches: Two-speed 2x4 and 4x4 ground drive, cutter wheel engage/disengage, creep, blade (if applicable) | Controller: Danfoss | Number of Pockets: 20 | Tooth Description: Yellow Jacket cutter system | Number of Teeth: 20 | Number of Indexes: 2 | Filtration Method: 10 micron fill strainer and 6 micron return filter | Fender Description | Cutterwheel Guard | Toolbox Description | System Type: Open-loop series system
  • Number of Primary: 2 individual (matched pair) | Number of Secondary: 6 banded
  • V-belt
  • Rigid
  • Recommended Type: Vermeer HyPower 68