2024 Vermeer® Stump Cutters SC362

Information

2024 Vermeer® Stump Cutters SC362

Developed with rental yards and tree care contractors in mind.

Vermeer has expanded its stump cutter lineup offering increased options for the customer. Equipped with a 35-hp (26.1 kW) Vanguard engine, a hydraulic ground drive and a belt driven cutter head, the SC362 provides operators with ample power and maneuverability to take out medium-sized stumps with the productivity and reliability that the field demands. The Vermeer SC362 is a great addition to any tree care or rental equipment fleet and the right complement to any Vermeer brush chipper or mini skid steer.

Features may include:

35-hp Vanguard gasoline engine
  • A 35-hp (26.1 kW) Vanguard gasoline engine offers low vibration, low emissions and a limited three-year warranty.
Selectable two-speed ground drive
  • Move easily between stumps with the selectable two-speed ground drive.
Convenient belt servicing
  • All of the belts are found on one side of the machine for convenient belt servicing

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Stump Cutters SC362
  • Control Station Description: Fixed side location
  • Available
  • 126.5 cm
  • 134.6 cm

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC362
  • Stump
  • Steerable Axle Typ: Hydraulic steering, oscillating axle
  • Rigid/Fixed (Rear)
  • Tires - Option One: 5.7" x 8" (14.5 x 20.3 cm) duals standard
  • 400 CCA
  • Shutdown System: Engine low oil pressure | System Voltage: 12 V
  • Low Travel: 20.1 m/min| High Travel: 40.5 m/min | Cutterwheel: 1400 rpm
  • Sound Power: 106
  • System relief: 140 bar
  • Flow at Maximum RPM: 14 L/min
  • Flow Control: AutoSweep® (option) or 2 speed ground drive
  • Control Station Description: Fixed side location
  • Description: Welded tube and plate steel
  • Warning: Operator presence status, clutch engage/disengagement status
  • Chip Containment: 7.7 cu ft (.2 cu m) | Cutterwheel Cut Below Ground: 38.1 cm | Cutterwheel Cut Above Ground: 61 cm | Cutterwheel Straight Line Dimension: 119.4 cm | Cutterwheel Diameter without Teeth: 43.2 cm | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Cutterwheel Thickness: 1.3 cm | Bearing Dimensions: 1.3 bore | Jackshaft Dimension: 1.3 | Cutterwheel Shaft: 1.8" (4.8 cm)
  • Transport: 134.6 cm
  • Transport (with duals): 126.5 cm | Transport (without duals): 88.9 cm
  • 279.4 cm
  • 126.5 cm
  • 134.6 cm
  • Tank: 15.1 L
  • Engine Option One: 598.7 kg
  • Jackshaft Bearing Type: Sealed ball | Reversible Pockets: 16 | Directional Control: Manual hydraulic value | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Controller: Vermeer ACS | Number of Pockets: 16 | Tooth Description: Yellow Jacket™ cutter system | Number of Teeth: 16 | Number of Indexes: 2 | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Fender Description | Cutterwheel Guard | Toolbox Description | System Type: Open-loop series system
  • Number of Primary: 2 individual (matched pair) | Number of Secondary: 6 Banded
  • V-Belt
  • Rigid
  • Recommended Type: Vermeer HyPower 68