2025 Vermeer® Stump Cutters SC30TX

Information

2025 Vermeer® Stump Cutters SC30TX

SC30TX highlights
  • A compact footprint for maneuverability and access
  • Designed with ease of maintenance in mind
  • Safety-focused design

Features may include:

Brains and brawn
  • Exclusive SmartSweep™ control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.
  • Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.
  • A 25-hp (18.4-kW) EFI gas engine starts well in colder weather, makes choke cables obsolete and offers improved fuel economy over comparable carbureted gas engines.
Easy to maintain
  • The hydraulically driven cutter wheel and hydrostatic ground drive eliminate belts or chain drives, reducing service and maintenance needs.
  • An accessible design provides quick access to the engine and daily service components for ease of maintenance.
Operator safety
  • The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Stump Cutters SC30TX
  • ECH740
  • Control Station Description: Fixed-rear
  • Gas
  • Available
  • 35 in | Track Rubber: 7 " (17.8 cm)
  • 49 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC30TX
  • Stump
  • ECH740
  • Kohler
  • 2
  • Gross (Maximum): 25 hp
  • 42 ft-lb
  • 6 " (15.2 cm) 2-Stage dry
  • Spin-on
  • Medium: Air/oil
  • Track Drive: Geroter
  • Max Fuel Consumption: 2.4 gph
  • Gas
  • Lower: Hydraulic motor
  • Track: Hydrostatic
  • 405
  • System Voltage: 12 | Switches: Cutter wheel drive
  • Cutterwheel: 1110 rpm | High Travel: 3.2 mph
  • System Type: Open loop | Filtration Method: Inline return filter
  • Pump Flow at Maximum RPM: 16 gpm | Track: 11.4 gpm (43.1 L/min)
  • System relief: 2750 psi | Track: 2900 psi (200 bar)
  • Bearing - Soft Ground: 3.4 psi
  • Track Drive: Hydrostatic
  • Control Station Description: Fixed-rear
  • Maximum Angle of Continuous Operation: 25 deg | Cutterwheel Diameter: 16 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line: 35.5 in | Cutterwheel Cut Above Ground: 25 in | Cutterwheel Cut Below Ground: 12 in
  • 94 in
  • 35 in | Track Rubber: 7 " (17.8 cm)
  • 49 in
  • Retracted: 35 " (88.9 cm) | Extended: 35 " (88.9 cm)
  • On Ground: 31.4 " (79.7 cm)
  • Tank: 6.8 gal
  • Tank: 9 gal
  • Volume with Filter: 2 qt
  • Chip Containment: 2.2 cu ft
  • 1550 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Type of Idler: Cast | Number of Idlers: 5
  • Recommended Oil: Kohler oil or API CH4/SJ / Hydraulic: ISO 68