2024 Vermeer® Stump Cutters SC292

Information

2024 Vermeer® Stump Cutters SC292

Contractors can now fit into tighter spaces for more efficient stump grinding.

The self-propelled SC292 stump cutter is equipped with a 26.5 hp (19.8 kW) EFI Kohler engine providing full-sized power in a compact unit. Convenience and safety features include a hydraulic ground drive system, exclusive Vermeer Yellow Jacket™ Cutter System and operator presence handle system design that disengages the cutter wheel if the operator lets go of the controls. Reduce engine, drivetrain and structural stress in typical stump removal. The Vermeer SC292 is a great addition to any tree care and rental equipment fleet, a perfect complement to any Vermeer brush chipper or mini skid steer

Features may include:

Easier start-up
  • Starts easier with the electronic fuel injected 26.5 hp (19.8 kW) EFI Kohler engine.
Selectable two-speed ground drive
  • Move easily between stumps with the selectable two-speed ground drive.
Convenient belt servicing
  • All of the belts are found on one side of the machine for convenient belt servicing.
Extended warranty
  • Protect your stump cutter investment with a 2-year/2000 hour or 3-year/3000 hour extended warranty

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Stump Cutters SC292
  • Control Station Description: Fixed side locations
  • Available
  • 126.5 cm
  • 132.1 cm

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC292
  • Stump
  • Electric clutch with brake
  • Steerable Axle Type: Manual single wheel or dual hydraulic steering axle
  • Axle/Suspension Rigid/Fixed
  • Tires - Option One: 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
  • 400 CCA
  • Shutdown System: Oil pressure shutdown | System Voltage: 12 V
  • Low Travel: 20.1 m/min | High Travel: 40.5 m/min | Cutterwheel: 1400 rpm
  • Sound Power: 105.4
  • System relief: 140 bar
  • Flow Control: AutoSweep (option) or 2 speed ground drive
  • Flow at Maximum RPM: 14 L/min
  • Control Station Description: Fixed side locations
  • Adapter for TLR25 trailer
  • Description: Welded tube and plate steel
  • Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengagement status
  • Chip Containment: .2 cu m | Cutterwheel Cut Below Ground: 38.1 cm | Cutterwheel Cut Above Ground: 61 cm| Cutterwheel Straight Line Dimension: 119.4 cm | Cutterwheel Diameter without Teeth: 43.2 cm | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Cutterwheel Thickness: 1.3 cm | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm)
  • Transport: 132.1 cm
  • Transport (without duals): 126.5 cm | without duals: 88.9 cm
  • 279.4 cm
  • 126.5 cm
  • 132.1 cm
  • Tank: 15.1 L
  • Engine Option One: 582.9 kg
  • Controller: Vermeer ACS | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Jackshaft Bearing Type: Sealed ball | Reversible Pockets: 16 | Directional Control: Manual hydraulic valve | Number of Pockets: 16 | Tooth Description: Yellow Jacket cutter system | Number of Teeth: 16 | Number of Indexes: 2 | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Fender Description | Cutterwheel Guard | Toolbox Description | System Type: Open-loop series system
  • Number of Primary: 2 individual (matched pair) | Number of Secondary: 6
  • V-Belt
  • Rigid
  • Recommended Type: Vermeer HyPower 68