2025 Vermeer® Stump Cutters SC292

Information

2025 Vermeer® Stump Cutters SC292

SC292 highlights
  • Reliability meets efficiency
  • Simplicity that enables productivity
  • Built for ease of maintenance

Features may include:

Efficient operation
  • The self-propelled SC292 stump cutter, equipped with a 26.5-hp (19.8-kW) EFI Relhko engine, delivers full-sized power in a compact unit and starts easily with electronic fuel injection.
  • SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.
Jobsite flexibility
  • Without the dual wheels installed, the SC292 is only 35 in (89 cm) wide, allowing it to enter narrow backyard gates and access tight jobsites.
  • Move easily between stumps with the selectable 2-speed ground drive.
  • Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.
Service-friendly
  • All of the belts are found on one side of the machine for convenient servicing and can be adjusted independently without affecting the other belts.
  • Protect your stump cutter investment with extended service coverage options.
Operator safety
  • The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Stump Cutters SC292
  • Command Pro EFI
  • Control Station Description: Fixed side locations
  • Gas
  • Available
  • 49.8 in
  • 52 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC292
  • Stump
  • Command Pro EFI
  • Kohler
  • 2
  • Gross (Maximum): 26.5 hp
  • 44.3 ft-lb
  • Dry-type safety element and restriction indicator
  • Spin on
  • Medium: Air
  • Max Fuel Consumption: 2.7 gph
  • Gas
  • Electric clutch with brake
  • Fixed
  • 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
  • 400 CCA
  • 20 amp
  • System Voltage: 12 V
  • Cutterwheel: 1400 rpm | Low Travel: 66 ft/min | High Travel: 133 ft/min
  • 105.4
  • System Type: Open-loop series system | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Flow Control: AutoSweep (option) or 2 speed ground drive | Directional Control: Manual hydraulic valve
  • Pump Flow at Maximum RPM: 3.7 gpm
  • System relief: 2030 psi
  • Control Station Description: Fixed side locations
  • Welded tube and plate steel
  • Adapter for TLR25 trailer
  • Cutterwheel Diameter: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Jackshaft Dimension: 1.3 | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block
  • 110 in
  • 49.8 in
  • 52 in
  • Transport (without duals): 35 in | Transport (with duals): 49.8 in
  • Transport: 52 in
  • Bearing: 1.3
  • Tank: 6 gal
  • Tank: 4 gal
  • Volume with Filter: 2 qt
  • Chip Containment: 7.7 cu ft
  • 1285 lbs
  • Tooth: Yellow Jacket cutter system | Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Reversible Pockets/Teeth: 16 | Jackshaft Bearing Type: Sealed ball | Steerable Axle Type: Manual single wheel or dual hydraulic steering axle | Axle: Rigid
  • Recommended Oil: 10W30 | Hydraulic: Vermeer HyPower 68 | Lower Gearbox:
  • V-Belt
  • Primary: 2 individual (matched pair) | Secondary: 6 Banded