2025 Vermeer® Stump Cutters SC1052

Information

2025 Vermeer® Stump Cutters SC1052

SC1052 highlights
  • Maximized cutting dimensions
  • An industrial design for optimized performance and efficiency
  • Fully featured for optimized productivity

Features may include:

Stump cutting powerhouse
  • A unique four-bar linkage maximizes cutting width by moving the cutter wheel away from the machine as the boom drops.
  • Experience exclusive stump cutting technology that maximizes your machine at the stump, such as the Vermeer cutting system, SmartSweep™ control system, and the operator presence system.
  • The 115-hp (86-kW) gas engine provides high productivity and speed, resulting in maximum cutting power and minimal maintenance needs, to help you complete more jobs in a day.
Goes where you need it to
  • Without the dual wheels installed, the SC1052 is only 35 in (89 cm) wide, allowing it to enter narrow backyard gates and access tight jobsites.
  • The SC1052 transfers power and torque to all four wheels, navigating tough terrain with minimal disturbance. Disengage differential locks for better maneuverability or engage them for maximum torque on uneven ground.
Efficient and versatile
  • Options for both the Vermeer cutting system (VCS) or Yellow Jacket™ cutter system give you the choice to select the wheel that is right for your operation and ground conditions.
  • A standard backfill blade minimizes the need for manual cleanup on the job.
  • Variable drive speed improves maneuverability during transport and provides greater control while grinding.
Operator safety
  • The swing out control station helps protect the operator from thrown objects while providing optimal visibility at the stump.
  • The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Stump Cutters SC1052
  • Control Station Description: Swing-out control station with three available positions plus auxiliary control station
  • Gas
  • Available
  • 35 in
  • 80 in

Specifications

  • 2025
  • Vermeer®
  • Stump Cutters
  • SC1052
  • Stump
  • Origin
  • 4.3L
  • 6
  • Gross (Maximum): 115 hp
  • 231 ft-lb
  • Two-stage dry type with maintenance-free pre-cleaner, restriction indicator, evacuator valve and safety element
  • Spin on
  • Medium: Extended Life (ELC) Nitrite Free (NF)
  • Max Fuel Consumption: 7.6 gph
  • Gas
  • Hydrostatic transmission
  • Lower: 90 deg
  • U Joints: 2 standard with double-lip seals
  • Axle: Rigid at dual drive wheels; oscillating front steerable axle
  • Spring-applied, hydraulic release at planetary drives
  • 20x8.00-10
  • Duals, 23x8.5-14
  • Front: 10 in x 6 in (25.4 cm x 15.2 cm) | Rear: 14-in x 6-in (35.6-cm x 15.2-cm) rim
  • 950 CCA
  • 70 Amp
  • System Voltage: 12V
  • Cutterwheel: 1014 rpm | Low Travel: 80 ft/min | High Travel: 140 ft/min
  • 111 dB(A)
  • System Type: 2 closed loops and 1 open loop | Filtration Method: Suction strainers and 6-micron return filter | Directional Control: Electric over hydraulic
  • Pump Flow at Maximum RPM: 56 gpm
  • System relief: 5800 psi
  • Control Station Description: Swing-out control station with three available positions plus auxiliary control station
  • Welded tube and plate steel
  • Maximum Angle of Continuous Operation: 30 deg | Cutterwheel Diameter: 26 in | Cutterwheel Thickness: .6 in | Cutterwheel Straight Line: 72 in | Cutterwheel Cut Above Ground: 31 in | Cutterwheel Cut Below Ground: 25 in | Degree of Oscillation: 15 deg
  • 152 in
  • 35 in
  • 80 in
  • Transport (without duals): 35 in | Transport (with duals): 56 in
  • Tank: 18.4 gal
  • Tank: 18 gal
  • Volume with Filter: 7.5 qt | Lower Gearbox: 2.7 qt
  • Chip Containment: 28.2 cu ft
  • Fan: Engine-driven | Tooth: Vermeer cutting system | Number of Teeth: 33 | Number of Indexes: 2 | Number of Pockets: 6 | Reversible Pockets/Teeth: 30 | Steerable Axle Type: Hydraulic, oscillating
  • 4460 lbs
  • Recommended Oil: 10W-30| Lower Gearbox: Syn 75W90 | Hydraulic: Vermeer HyPower 68