2025 Vermeer® Brush Chippers BC700XL
- Year 2025
- Make Vermeer®
- Model Brush Chippers
- Engine ECH740
2025 Vermeer® Brush Chippers BC700XL
2025 Vermeer® Brush Chippers BC700XL
BC700XL highlights- Move from jobsite to jobsite with ease
- Maximum productivity while minimizing maintenance
- Safety features designed with the operator in mind
Features may include:
Transport with ease- Easily move from jobsite to jobsite with the smallest member of the Vermeer brush chipper line.
- A large infeed opening simplifies feeding irregular material and reduces the need for crosscuts before feeding the chipper.
- SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
- The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism in an emergency.
- VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.
Engine
Engine Manufacturer
Kohler
Engine
ECH740
Engine Power
Gross Horsepower (Maximum): 25 hp
Engine Torque, Maximum
41.7 ft-lb
Air Cleaner
Kohler HD 2-Stage Dry
Oil Filter
Spin-on
Cooling
Medium: Oil/Air
Motor
Motor Type
Manufacturer: White Hydraulics | Displacement: 14
Fuel System
Fuel System
Max Fuel Consumption: 2.4 gph
Fuel Type
Gasoline
Drivetrain
Clutch
Manual
Suspension
Suspension
Axle: 2000 lb/(907.2 kg) rubber torsion axle / 2000lb/(907.2 kg) rubber torsion axle with electric brakes
Wheels & Tires
Tires, Rear Specification
ST185/80D13 load range D
Wheels
13 x 5, bolt circle 5 on 4.5
Battery
Battery
Group 26, 400 CCA
Electric
Alternator
20A Charging
Electrical
System Voltage: 12 Volt
Operational
Operating Speed
Feed: 49.4 ft/min | Drum/Disc Cutting System: 1748
Hydraulics
Hydraulic Type
System: Open center | Filtration Method: Return flow filtration, 10 micron
Hydraulic Pump
At Maximum RPM: 3.8 gpm
Maximum Pressure
System relief: 2500 psi
Airflow
5000 cfm
Chassis
Frame Type
3/16"/(.5 cm) ASTM A1011 steel
Hitch/Type
2"/(5.1 cm) ball coupler
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 25 deg | Feed Roller Minimum Distance to Drum: 4 in | Infeed Throat Capacity: 6" x 8" (15.24 cm x 20.32 cm) | Pinch Point - Distance to End of Feed Table: 65.4 in | Distance from Feed Table to Ground: 28.1 in | Distance from Feed Table to Ground: 28.1 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 12" (30.48 cm) / Diameter: 2 in / Material Thickness: .1 in | Drum/Disc Cutting System - Material Capacity: 6 in / Thickness: 1.3 in / Diameter: 23.9 in / Knife Thickness: .6 in / Bedknife Size: 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert | Discharge System - Bottom Thickness: .1 in / Top Thickness: .1 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 240 deg | Fender: .1"/(.3 cm) Steel bolt-on
Length
Feed Table Up, Tongue: 115 in | Table Down, Tongue Extended: 136 in | Infeed Table: 30.2 in
Width
71 in | Infeed Table: 41.2 in | Drum/Disc Cutting System: 8 in
Height
102 in | Infeed Hopper: 22.1 in | Chute: 97.2 in
Roller Diameter
Feed: 10"
Bore
1.5 in
Capacities
Fuel Capacity
Tank: 6 gal
Oil capacity
With Filter: 2 qt
Hydraulic Capacity
Tank: 6.8 gal
Load Capacity, Land
Feed Roller Clamp: 525 lbs
Features
Dynamic Capacity: 5640 lbs | Static Capacity: 4460 lbs
Weights
Weight
1800 lbs | Tongue: 180 lbs | Feed Roller: 100 lbs | With Shaft: 176 lbs
Features
Features
Feed Roller Orientation: Horizontal | Feed Roller Clamp Type: Spring/Feed Roller Weight | Reset Method: Dual green hold-to-run buttons | Four position: (E-Stop), Forward, Stop, (Reverse) | Fixture Method: Welded | Cutter Drive - Type: Flange-mounted ball type, self-aligning / Manufacturer: Linkbelt / Belt Idler/ Tensioner: Spring-loaded adjustable Idler | Rotation Type: Manual
Oil Type
Recommended: Kohler oil or API CH4/SJ / Vermeer VMF Gold
Construction Material
Drum/Disc Cutting System: A8 Chipper Steel
Belt Type
2-band 5-V profile Aramid