2025 Vermeer® BC1800XL Tier 4 Final 130 HP
- Year 2025
- Make Vermeer®
- Model BC1800XL Tier 4 Final
- Engine QSF3.8L
2025 Vermeer® BC1800XL Tier 4 Final 130 HP
2025 Vermeer® BC1800XL Tier 4 Final 130 HP
BC1800XL Tier 4 Final highlights- Built for jobsites with large-diameter chipping
- Intelligent chipping for increased productivity
- Take control when the jobsite demands it
Features may include:
Powerful and control- Minimize vibration and structural stress on the rear of the machine with vertical feed rollers featuring helical cleats that firmly grip the material.
- Ideal for land-clearing and tree care operations, the BC1800XL is available with a powerful 173-hp (129-kW) John Deere® Tier 4 Final engine
- SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
- The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
- The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
- VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.
Engine
Engine Manufacturer
Cummins
Engine
QSF3.8L
Emissions
Tier 4 Final
Cylinder Liners
4
Engine Power
Gross Horsepower (Maximum): 130 hp
Engine Torque, Maximum
360 ft-lb
Motor
Motor Type
Manufacturer: White RE470 | Displacement: 28.4
Fuel System
Fuel Type
Diesel
Suspension
Suspension
Axle: Torflex
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Rear Specification
235/75R17.5 load range H
Wheels
17.5" x 6.75" BC of 8 on 6.5"
Battery
Battery
950 cca
Electric
Alternator
90
Electrical
System Voltage: 12
Operational
Operating Speed
Feed: 117 ft/min | Drum/Disc Cutting System: 1100
Hydraulics
Hydraulic Type
System: Open Center | Filtration Method: 3 micron return, 100 micron suction
Hydraulic Pump
At Maximum RPM: 6.3 gpm
Maximum Pressure
System relief: 2800 psi | Auto Reverse: 2400 psi
Airflow
3544 cfm
Chassis
Frame Type
7" x 2.13" Channel
Hitch/Type
Pintle
Lights and Safety
Lighting
LED
Dimensions
Dimensions
Feed Roller: 23.5" x 18 | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in / Infeed Table Material Thickness: .2 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 11 GA / Diameter: 2 in / Material Thickness: 11 in | Drum/Disc Cutting System - Material Capacity: 19 in / Thickness: 26.1 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .3 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg | Tongue: 4 x 4 x 0.375 | Tongue Extension: Two 12" Increments (for non winch)
Length
Feed Table Up, Tongue: 177 in | Table Down, Tongue Extended: 231 in | Infeed Table: 36 in
Width
78.5 in| Infeed Table: 67 in | Drum/Disc Cutting System: .5 in
Height
107 in | Infeed Hopper: 34 in | Chute: 110 in
Capacities
Hydraulic Capacity
Tank: 12 gal
Load Capacity, Land
Feed Roller Clamp: 380 lbs
Weights
Weight
9600 lbs (without winch and hydraulic jack) | 10366 lbs (with winch, hydraulic jack and hydraulic chute) | With Shaft: 1160 lbs
Features
Features
Feed System - Feed Roller Orientation: Vertical / Number of Feed Rollers: 2 / Feed Roller Clamp Type: Spring / Number of Feed Roller Motors: 2 | Safety System - Reset Method: Green Hold to Run Button / Positions: 4: E-Stop, Forward, Neutral, Reverse | Drum/Disc Cutting System - Safety Lock - Number of Positions: 4 / Useable Edges: 2 / Fixture Method: Weld on / Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Rotational Lock: Self Lock
Oil Type
Recommended: Vermeer VMF
Knife Quantity
Feed System: (2) 11 | Drum/Disc Cutting System: 4 / Bolts/Knife: 5
Construction Material
Drum/Disc Cutting System: A8 Modified Chipper Steel | Bedknife Material: 1018 CD / Belt Idler/Tensioner: Spring loaded
Paddle Quantity
12