2025 Vermeer® Brush Chippers BC1800XL Gas

Information

2025 Vermeer® Brush Chippers BC1800XL Gas

BC1800XL Gas highlights
  • Built with strength for demanding conditions
  • Provides ability to feed with confidence
  • Performance ready for large takedowns

Features may include:

Powerful and control
  • The BC1800XL is equipped with vertical feed roller technology to help aid in machine loading and the feeding of adverse materials.
  • Experience powerful yet efficient feeding thanks to the Origin® 6.2L gasoline powered engine.
Intelligent feeding
  • SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
  • The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
Safety
  • The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
Your access to MORE: VermeerOne™
  • VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

Photos

Highlights

  • La Crete, Alberta
  • 2025
  • Vermeer®
  • Brush Chippers BC1800XL Gas
  • Gas
  • Available
  • 78.5 in | Infeed Table: 67 in | Drum/Disc Cutting System: 26.2 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in

Specifications

  • 2025
  • Vermeer®
  • Brush Chippers
  • BC1800XL Gas
  • Brush
  • Origin
  • 6.2L
  • 8
  • Gross Horsepower (Maximum): 172 hp
  • 322 ft-lb
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • Manufacturer: White RE470 | Displacement: 28.4
  • Max Fuel Consumption: 11.7 gph
  • Gas
  • 13" Spring Loaded Clutch | Drive Engagement: Manual Lever
  • Axle: Torflex
  • Electric
  • 235/75R17.5 load range H
  • 17.5" x 6.75" BC of 8 on 6.5"
  • 950 cca
  • 70
  • System Voltage: 12
  • Feed: 117 ft/min | Drum/Disc Cutting System: 1100
  • Actuation Force (BFSB):
  • 124
  • System: Open Center | Filtration Method: 3 micron return, 100 micron suction
  • At Maximum RPM: 6.3 gpm
  • System relief: 2850 psi | Auto Reverse: 2650 psi
  • 3544 cfm
  • 7" x 2.13" Channel
  • Pintle
  • LED
  • Maximum Angle of Continuous Operation: 20 deg | Fan: 18.7 | Feed Roller: 23.5" x 18" | Feed Roller (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Tongue: 4 x 4 x 0.375 | Tongue Extension: Two 12" Increments (for non winch) | Discharge System - Bottom Thickness: .1 in / Top Thickness: .2 in / Side Wall Thickness: .1 in / Deflector Thickness: .1 in / Chute Rotation Angle: 270 deg | Drum/Disc Cutting System - Material Capacity: 19 in / Thickness: .5 in / Diameter: 36 in / Knife Thickness: .6 in / Knife Size: 0.625 x 5 x 10 / Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in
  • Feed Table Up, Tongue: 177 in | Table Down, Tongue Extended: 231 in | Infeed Table: 36 in
  • 78.5 in | Infeed Table: 67 in | Drum/Disc Cutting System: 26.2 in
  • 107 in | Infeed Hopper: 34 in | Chute: 110 in
  • 2.9 in
  • Tank: 50 gal
  • With Filter: 5 qt
  • Tank: 12 gal
  • Feed Roller Clamp: 380 lbs
  • Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Rotation Type: Worm gear with rotational lock | Rotational Lock: Self Lock | Cutter Drive - Type: Spherical roller / Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Number of Bearings: 2 | Safety Lock - Number of Positions: 4 | Useable Edges: 2 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4
  • 8800 lbs (without winch and hydraulic jack) | 9300 lbs (with winch, hydraulic jack and hydraulic chute) | Feed Roller: 116 lbs | With Shaft: 1160 lbs
  • Recommended: API / Vermeer VMF
  • Feed System: 11 | Drum/Disc Cutting System: 4 / Bolts/Knife: 5
  • Drum/Disc Cutting System: A8 Modified Chipper Steel | Bedknife: 1018 CD
  • 12
  • 5V