2024 Vermeer® Brush Chippers BC1800XL Gas
- Year 2024
- Make Vermeer®
- Model Brush Chippers
- Engine PSI
2024 Vermeer® Brush Chippers BC1800XL Gas
2024 Vermeer® Brush Chippers BC1800XL Gas
Speed and large capacity equals high productivity.Whether you are a municipality or a tree service company and working on a jobsite which calls for large-diameter chipping, look to the Vermeer BC1800XL gas brush chipper. Built with strength for demanding conditions, it has the power needed for land-clearing and tree care operations. The BC1800XL gas brush chipper is equipped with features such as patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.
Features may include:
Vertical feed rollers- Reduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.
- Improved operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.
- With the standard Tree Commander™ remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely. The remote can be attached to the operator’s belt mounted directly to the operator’s station of a Vermeer mini skid steer.
Engine
Engine
PSI
Displacement
5.7 L
Cylinder Liners
8
Engine Power
Gross (Maximum): 123 kw
Engine Torque, Maximum
406.7 Nm
Bore
7.4 cm
Air Cleaner
2 Stage Dry
Oil Filter
Spin-on
Cooling
Medium: Liquid
Motor
Displacement
28.4
Motor Type
Manufacturer: White RE470
Fuel System
Fuel System
Max Fuel Consumption: 44.3 lph
Fuel Type
Gas
Drivetrain
Clutch
13" Spring Loaded Clutch | Drive Engagement: Manual Lever
Suspension
Suspension
Torflex | Type - Option One: Rubber Torsional | Manufacturer - Option One: Dexter
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Front Specification
235/75R17.5 load range H
Wheels
17.5" x 6.75" BC of 8 on 6.5"
Battery
Battery
950 cca
Electric
Electrical
System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Shutdown System: High temp, low pressure | Radio Remote Control: Tree Commander | Controller: Vermeer ACS: CB02
Alternator
70
Operational
Operating Conditions
Rope Line Pull: 907.2 kg
Operating Speed
Feed: 117 ft/min | drum: 1100
Performance
Noise Level
124 dbA
Hydraulics
Hydraulic Type
System Type: open Center | Winch Boom Structure: 0.25 GR50
Hydraulic Pump
Pump Flow at Maximum RPM: 23.8 L/min
Maximum Pressure
System relief: 196.5 bar | Auto Reverse: 182.7 bar | Winch Relief System: 206.8 bar
Airflow
3544 cfm
Chassis
Chassis
Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
Frame Type
7" x 2.13" Channel
Hitch/Type
Pintle
Lights and Safety
Safety Features
Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
Dimensions
Dimensions
Fan: 18.7 | Maximum Angle of Continuous Operation: 20 deg | Feed Roller Dimension: 23.5" x 18" | Feed Roller Dimension (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 77.5 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg / Reduced: 12 deg | Diameter: 5.1 cm | Material Thickness: 27.9 cm | Material Capacity: 48.3 cm | Thickness: 1.3 cm | Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 3.2 cm | Bottom Thickness: .2 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg | Winch Rope: 7/16" | Rope Choker: 1/4"
Length
Feed Table Up, Tongue In: 449.6 cm | table Down, Tongue Extended: 586.7 cm | Infeed Table: 91.4 cm| Rope: 45.7 m
Width
199.4 cm | Infeed Table: 170.2 cm | drum: 66.4 cm
Height
271.8 cm | Infeed Hopper: 86.4 cm | Chute: 279.4 cm
Capacities
Fuel Capacity
Tank: 189.3 L
Oil capacity
Oil Volume with Filter: 5 qt
Cooling System
Coolant Capacity (Engine and Radiator): 18.9 L
Load Capacity, Land
Feed Roller Clamp Load: 172.4 kg
Hydraulic Capacity
Tank: 45.4 L
Features
Dynamic Capacity: 18960.2 kg | Static Capacity: 32431.9 kg | Chasis Capacity - Option One: 10,000
Weights
Weight
Without winch and hydraulic jack: 3991.6 kg | with winch, hydraulic jack and hydraulic chute: 4218.4 kg | of Feed Roller: 52.6 kg | With Shaft: 526.2 kg
Features
Features
Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Fender Description: Integrated | Trailer Light Type: LED | Number of Bearings: 2 | Type: Spherical roller | Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Winch: Controls Forward, Reverse, Free Spool
Oil Type
Recommended: API | hydraulic Recommended: Vermeer VMF
Construction Material
A8 Modified Chipper Steel | Bedknife: 1018 CD
Paddle Quantity
12
Knife Quantity
11 | 4 | Number of Bolts/Knife: 5
Bale Type
5V