2024 Vermeer® Brush Chippers BC1800XL Gas

Information

2024 Vermeer® Brush Chippers BC1800XL Gas

Speed and large capacity equals high productivity.

Whether you are a municipality or a tree service company and working on a jobsite which calls for large-diameter chipping, look to the Vermeer BC1800XL gas brush chipper. Built with strength for demanding conditions, it has the power needed for land-clearing and tree care operations. The BC1800XL gas brush chipper is equipped with features such as patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.

Features may include:

Vertical feed rollers
  • Reduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.
Improved operator safety
  • Improved operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.
Tree Commander™ remote control
  • With the standard Tree Commander™ remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely. The remote can be attached to the operator’s belt mounted directly to the operator’s station of a Vermeer mini skid steer.

Photos

Highlights

  • La Crete, Alberta
  • 2024
  • Vermeer®
  • Brush Chippers BC1800XL Gas
  • PSI
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • Gas
  • Available
  • 199.4 cm | Infeed Table: 170.2 cm | drum: 66.4 cm
  • 271.8 cm | Infeed Hopper: 86.4 cm | Chute: 279.4 cm

Specifications

  • 2024
  • Vermeer®
  • Brush Chippers
  • BC1800XL Gas
  • Brush
  • PSI
  • 28.4
  • 8
  • Gross (Maximum): 123 kw
  • 406.7 Nm
  • 7.4 cm
  • 2 Stage Dry
  • Spin-on
  • Medium: Liquid
  • Manufacturer: White RE470
  • Max Fuel Consumption: 44.3 lph
  • Gas
  • 13" Spring Loaded Clutch | Drive Engagement: Manual Lever
  • Torflex | Type - Option One: Rubber Torsional | Manufacturer - Option One: Dexter
  • Electric
  • 235/75R17.5 load range H
  • 17.5" x 6.75" BC of 8 on 6.5"
  • 950 cca
  • System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Shutdown System: High temp, low pressure | Radio Remote Control: Tree Commander | Controller: Vermeer ACS: CB02
  • 70
  • Rope Line Pull: 907.2 kg
  • Feed: 117 ft/min | drum: 1100
  • 124 dbA
  • System Type: open Center | Winch Boom Structure: 0.25 GR50
  • Pump Flow at Maximum RPM: 23.8 L/min
  • System relief: 196.5 bar | Auto Reverse: 182.7 bar | Winch Relief System: 206.8 bar
  • 3544 cfm
  • Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
  • 7" x 2.13" Channel
  • Pintle
  • Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
  • Fan: 18.7 | Maximum Angle of Continuous Operation: 20 deg | Feed Roller Dimension: 23.5" x 18" | Feed Roller Dimension (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 77.5 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg / Reduced: 12 deg | Diameter: 5.1 cm | Material Thickness: 27.9 cm | Material Capacity: 48.3 cm | Thickness: 1.3 cm | Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 3.2 cm | Bottom Thickness: .2 cm | Top Thickness: .5 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .2 cm | Chute Rotation Angle: 270 deg | Winch Rope: 7/16" | Rope Choker: 1/4"
  • Feed Table Up, Tongue In: 449.6 cm | table Down, Tongue Extended: 586.7 cm | Infeed Table: 91.4 cm| Rope: 45.7 m
  • 199.4 cm | Infeed Table: 170.2 cm | drum: 66.4 cm
  • 271.8 cm | Infeed Hopper: 86.4 cm | Chute: 279.4 cm
  • Tank: 189.3 L
  • Oil Volume with Filter: 5 qt
  • Coolant Capacity (Engine and Radiator): 18.9 L
  • Feed Roller Clamp Load: 172.4 kg
  • Tank: 45.4 L
  • Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Fender Description: Integrated | Trailer Light Type: LED | Number of Bearings: 2 | Type: Spherical roller | Manufacturer: Linkbelt | Belt Idler/Tensioner: Spring loaded | Winch: Controls Forward, Reverse, Free Spool
  • Without winch and hydraulic jack: 3991.6 kg | with winch, hydraulic jack and hydraulic chute: 4218.4 kg | of Feed Roller: 52.6 kg | With Shaft: 526.2 kg
  • Recommended: API | hydraulic Recommended: Vermeer VMF
  • A8 Modified Chipper Steel | Bedknife: 1018 CD
  • 12
  • 11 | 4 | Number of Bolts/Knife: 5
  • 5V