2025 Vermeer® BC1000XL Tier 4 Final 49 HP
- Year 2025
- Make Vermeer®
- Model BC1000XL Tier 4 Final
- Engine TD2.9L
2025 Vermeer® BC1000XL Tier 4 Final 49 HP
2025 Vermeer® BC1000XL Tier 4 Final 49 HP
BC1000XL Tier 4 Final highlights- Versatility where it matters most
- Feed with machine intelligence for maximum productivity
- Safety features designed with the operator in mind
Features may include:
Powerful engine options- Designed for the modern where you are, the BC1000XL offers a choice of Tier 4 Final engines — 49 hp or 74 hp (36.4 kW or 55 kW) — that comply with emission regulations.
- Spend less time maintaining with a clutchless PTO system that helps prevent premature wear on the belt drive by only allowing engagement at low idle.
- The BC1000XL comes with a 25-gal (94.6-L) fuel tank that lets you put in more hours before refueling.
- The EcoIdle™ engine control system reduces engine speed to a preset lower rpm after one to five minutes of inactivity, saving fuel and reducing jobsite noise.
- SmartFeed, a patented feed-sensing control system, boosts operator productivity and reduces engine strain by monitoring engine rpm and controlling feed rollers.
- The patented bottom feed stop bar is strategically positioned so the operator can strike it to shut off the feed mechanism.
- VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.
Engine
Engine Manufacturer
Deutz
Engine
TD2.9L
Emissions
Tier 4 Final
Cylinder Liners
4
Engine Power
Gross Horsepower (Maximum): 49 hp
Engine Torque, Maximum
108 ft-lb
Air Cleaner
2-stage dry with safety element
Oil Filter
Spin-on
Cooling
Medium: Liquid
Motor
Motor Type
Manufacturer: White| Displacement: 28.3
Fuel System
Fuel System
Max Fuel Consumption: 3 gph
Fuel Type
Diesel
Drivetrain
Clutch
Clutchless PTO | Drive Engagement: Belt tensioner
Suspension
Suspension
Axle: Torsion
Brakes
Brake System Type
Standard electric
Wheels & Tires
Tires, Rear Specification
ST235/80R16 Load Range E
Wheels
16" x 6" (40.6 cm x 15.2 cm)
Battery
Battery
Group 31; 950 CCA
Electric
Alternator
95 Amp
Electrical
System Voltage: 12 Volt
Operational
Operating Speed
Feed: 105 ft/min | Drum/Disc Cutting System: 2050 rpm
Operating Conditions
Actuation Force (BFSB): 34 lbs
Hydraulics
Hydraulic Type
System: Tandem center | Filtration Method: 10 micron return; 100 micron suction
Hydraulic Pump
At Maximum RPM: 2.7 gpm
Maximum Pressure
System relief: 2500 psi
Chassis
Frame Type
7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
Hitch/Type
Pintle
Lights and Safety
Lighting
LED
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 30 deg | Fan: 15" (38.1 cm) suction | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Safety System - Bottom Feed Stop Bar Diameter: 2 in / Bottom Feed Stop Bar Material Thickness: 11 GA | Drum/Disc Cutting System - Material Capacity: 12 in / Thickness: .4 in / Diameter: 20 in / Knife Thickness: .6 in | Knife Size: 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Chute Rotation Angle: 270 deg |Tongue: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) | Tongue Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
Length
Feed Table Up, Tongue: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
Width
66.5 in | Infeed Table: 52 in | Infeed Throat Capacity: 17" (43.2 cm) | Drum/Disc Cutting System: 20 in
Height
101 in | Infeed Hopper: 12 in | Infeed Throat Capacity: 12" (30.5 cm) | Chute:101 in
Capacities
Fuel Capacity
Tank: 25 gal
Oil capacity
With Filter: 8.4 qt
Hydraulic Capacity
Tank: 7 gal
Load Capacity, Land
Feed Roller Clamp: 350 lbs
Features
Coolant Capacity (Engine and Radiator): 2.9 gal
Weights
Weight
4995 lbs | Tongue: 600 lbs | Feed Roller: 400 lbs | With Shaft: 460 lbs
Features
Features
Feed System - Feed Roller Orientation: Horizontal / Number of Feed Rollers: 1 / Number of Feed Roller Motors: 1 | Safety System - Reset Method: Green hold-to-run button / Positions: 4: E-stop, forward, neutral and reverse | Drum/Disc Cutting System - Safety Lock - Number of Positions: 2 / Fixture Method: Weld-on / Bedknife - Number of Useable Edges: 4 | Rotation Type: Rotation handle with pin lock | Switches: Feed Stop Bar Sensitivity, Droop, Ecoldle | Controller: Vermeer ACS | Display: Multifunctional display (MFD)
Oil Type
Recommended: 10W30 / Vermeer VMF
Knife Quantity
Feed System: 2 | Drum/Disc Cutting System: 2 / Bolts/Knife: 4
Construction Material
Drum/Disc Cutting System: A8 chipper steel
Paddle Quantity
5